Discussion
As another alternative, I used a standard universal battery clamp on mine, just had to drill 2 holes on the inner side of the battery tray.
The relocated expansion tank is mounted on a piece of folded stainless sheet which is loose but held in place by the battery.
Rob.
Ps. Sorry about the upside down picture, can't get it the right way up for some reason, proves the battery clamp works anyway!
The relocated expansion tank is mounted on a piece of folded stainless sheet which is loose but held in place by the battery.
Rob.
Ps. Sorry about the upside down picture, can't get it the right way up for some reason, proves the battery clamp works anyway!
I had a nice neat stainless version of the original clamp on mine. Then I decided to put the biggest battery I could onto the tray. I now have a nice (not as nice as Philpotts I'm afraid, another improvement to add to the list) ratchet strap over the top and it works a treat, dead easy to get the battery out and the battery no longer 'chaffes' against the mounting. The MOT man reckons it is much better as well! I am NOT going back to a fiddly metal clamp!
Gassing Station | S Series | Top of Page | What's New | My Stuff