water pump

[BrunoM]

Hi all,

The waterpump on my S1 needs to be changed, but I'm not sure which one I exactly need.
I have already searched on this forum, but without succes.

My TVR is a S1 2.8 with motor code PR
Can someone comfirm that this is the correct pump? it looks the same as the one on my car.

thanks,
Bruno

[greymrj]

Sorry Bruno, I cannot make that link work. Give me the full site info and I will try to check for you.

[glenrobbo]

Hi Bruno,
The water pump is exactly the same as fitted to the Ford Capri 2.8 Injection or Injection Special.
Your supplier should have that listed.

I think that the 2.9 engine water pump is slightly different.

Quite an easy job, but put some penetrating oil on the screws, let it soak in, and if they are tight, give them a tap with a hammer to help them undo. You don't want to shear any of them.
Good luck!

Hope you get it fixed before we come to Bruges

Glen

Edited by glenrobbo on Saturday 18th April 17:46

[TopVpowerRoadste]

Hi Bruno,

I live not far from Bruges.

Best regards,

Geoffrey

[glenrobbo]

That makes 3 TVR S's living near Bruges!

On Monday 25th May there will be another 3 of us visiting Bruges after our weekend at the Spa Classic. If you want to join us in the evening, send me an email via my profile page for details of time and meeting place.

[BrunoM]

greymrj said:

Sorry Bruno, I cannot make that link work. Give me the full site info and I will try to check for you.

I can not put a direct link, but if you go to:
http://www.meyle.com/en/spare-parts/search.html and search for the following part number 713 220 0013 you'll find the water pump I was reffering to.

glenrobbo said:

Hi Bruno,
The water pump is exactly the same as fitted to the Ford Capri 2.8 Injection or Injection Special.
Your supplier should have that listed.

I think that the 2.9 engine water pump is slightly different.

Quite an easy job, but put some penetrating oil on the screws, let it soak in, and if they are tight, give them a tap with a hammer to help them undo. You don't want to shear any of them.
Good luck!

Hope you get it fixed before we come to Bruges

Glen

Edited by glenrobbo on Saturday 18th April 17:46

unfortunatly there were 2 bolts that sheared off when I removed the old pump. I already managed to remove 1, but there is still one sheared bolt left in the engine. I probably have to drill it out
I have already tried to fit a new water pump, but it was not the correct one. the impeller of the water pump was not the same as the one that was installed on my engine.

If someone can give me a proper reference number to the pump I need, it will help me forward.

[glenrobbo]

Hi Bruno,
Does this water pump look correct?





It is a Quinton Hazell QCP2087 Cologne V6, Sierra to 10/84, Capri, Cortina

Another possible ( I cannot be certain ) alternative is QCP2495 Cologne V6, Sierra from 10/84

They are both priced at £39.95listed on page 65 of the 2015 Burton Catalogue

www.burtonpower.com

email: [e-mail]

or Telephone [phone]

[BrunoM]

thanks Glen,
that looks like the correct one.

can you confirm that the dimensions on the drawing are the same for the Quinton Hazell QCP2087 pump?

Edited by BrunoM on Tuesday 21st April 09:16

Edited by BrunoM on Tuesday 21st April 09:16