Fuel pump relay
Discussion
Hi gents,
New relay needed to eliminate an intermittent lack of fuelling on hot start.
The spade connections are sited differently to the normal arrangement,
30 and 87 are adjacent as are 85 and 86. These are usually opposite.
Switching remains the same but a normal relay won't operate.
Question is whether to swap the plug for a standard one and use a standard relay
Or find a relay with this unusual connection?
New relay needed to eliminate an intermittent lack of fuelling on hot start.
The spade connections are sited differently to the normal arrangement,
30 and 87 are adjacent as are 85 and 86. These are usually opposite.
Switching remains the same but a normal relay won't operate.
Question is whether to swap the plug for a standard one and use a standard relay
Or find a relay with this unusual connection?
Edited by Alan461 on Tuesday 19th May 11:39
HvdWeerden said:
Alternative parts list says : Lucas FDB 502
A useful reference, scroll down to page 3.7I went looking for one on Ebay a while back, thought I'd found one but when I asked seller to cross check numbers it was wrong, but he had a couple of "right" ones ......... and for not a lot of money
Certainly wasn't anywhere near this much !
Must be one here somewhere?
Edited by phillpot on Tuesday 19th May 15:16
Gassing Station | S Series | Top of Page | What's New | My Stuff