V8S Remove of gas pedal ??
Discussion
Making hard work of this!
Left or right hand drive I can't see that pedal box would differ (no different part numbers in parts book) while you may drive on the wrong side of the road you do at least still use the right, your right, foot for the throttle pedal (gas pedal is such a vulgar term, gas comes down a pipe to make my cooker work).
Here is a pedal box.....
Here is the split pin you need to remove.....
And now the pivot pin pulls out towards the brake pedal.....
Should you wish to remove the complete pedal box it's not a big job,
Pivot pins out of clutch and brake pedal.Clutch pin is a spring clip whereas brake is a conventional clevis/split pin.
2 wires off brake light switch.
4 nuts off back of servo.
2 nuts and bolts off clutch master cylinder.
2 nuts and bolts (M8) through flat part of bulkhead/top of pedal box.
No need to disconnect any pipes
Left or right hand drive I can't see that pedal box would differ (no different part numbers in parts book) while you may drive on the wrong side of the road you do at least still use the right, your right, foot for the throttle pedal (gas pedal is such a vulgar term, gas comes down a pipe to make my cooker work).
Here is a pedal box.....
Here is the split pin you need to remove.....
And now the pivot pin pulls out towards the brake pedal.....
Should you wish to remove the complete pedal box it's not a big job,
Pivot pins out of clutch and brake pedal.Clutch pin is a spring clip whereas brake is a conventional clevis/split pin.
2 wires off brake light switch.
4 nuts off back of servo.
2 nuts and bolts off clutch master cylinder.
2 nuts and bolts (M8) through flat part of bulkhead/top of pedal box.
No need to disconnect any pipes
phillpot said:
asteinha said:
The split pin is on the left side.
Are you sure?Did you have your head upside down when you were looking
Gassing Station | S Series | Top of Page | What's New | My Stuff