Winter Projects
Discussion
me,....wait for the menders to fix the bonnet and front end damage and then find some winter events to drive it to...(annoyingly I will miss Chatsworth and the lakes museum weekends...but then what?) ....
...oh, I may fix a new charger socket on the passenger side for euro tours...etc...and maybe some new tyres that don't skid in the rain....
...oh, I may fix a new charger socket on the passenger side for euro tours...etc...and maybe some new tyres that don't skid in the rain....
Not much to do on mine,
Replace the folding bit of the roof
Rebuild the replacement 4.6 engine
Put the tacho back in and wire it up to work with the ECU that's now fitted
Keep driving it
Everything else can wait but next years jobs are
Rebuild the gearbox when I fit the new engine
Modify the bonnet hinges while I'm there
Change the seats
Paint it
Replace the folding bit of the roof
Rebuild the replacement 4.6 engine
Put the tacho back in and wire it up to work with the ECU that's now fitted
Keep driving it
Everything else can wait but next years jobs are
Rebuild the gearbox when I fit the new engine
Modify the bonnet hinges while I'm there
Change the seats
Paint it
Barkychoc said:
Barry S1 said:
I'd be tempted to buy a cheapo endoscope off ebay (about £6 if you use a USB laptop version and wait for snail delivery from China) and have a look in that outrigger so see if it really is terminal. I suspect so but sometimes surprises occur.phillpot said:
Kitchski said:
I've been advised that Piper 270 cams are noisy and it gave no power gain whatsoever.
I'm also running a solid alloy timing gear set, which apparently can chatter a bit. Irritating as the reason I opted for alloy.
"tappety" noise is all about "ramp angles" and clever stuff I believe, the way the cam lobe and follower act together?I'm also running a solid alloy timing gear set, which apparently can chatter a bit. Irritating as the reason I opted for alloy.
Think it was the Piper website that suggested possible 10-15 bhp gain, mine hit 184.9 (185 would have been nice) on the rollers but it is a 2.9 so maybe responds differently and of course has timing chain rather than gears.
Gassing Station | S Series | Top of Page | What's New | My Stuff