Discussion
Hi Everyone been a while since I posted.
Unfortunately me and the S parted company with the road yesterday. Fortunately no one was injured but the S took a bit of beating. However after straightening the the throttle plate she started and I drove her home with a police escort.
Many thanks to Dave M, Sal and Laurie S for coming to my aid very much appreciated.
The S thankfully looks repairable but the bonnet has split in two.
Does anyone have a bonnet that they are willing to sell ?
Unfortunately me and the S parted company with the road yesterday. Fortunately no one was injured but the S took a bit of beating. However after straightening the the throttle plate she started and I drove her home with a police escort.
Many thanks to Dave M, Sal and Laurie S for coming to my aid very much appreciated.
The S thankfully looks repairable but the bonnet has split in two.
Does anyone have a bonnet that they are willing to sell ?
Hi mate, hope this helps & youll be back on the road in no time
TVR S1-S2 bonnet http://www.ebay.co.uk/itm/TVR-S1-S2-Bonnet-/122029...
TVR S1-S2 bonnet http://www.ebay.co.uk/itm/TVR-S1-S2-Bonnet-/122029...
Many thanks bonnet bought just need to have it shipped to my body shop in Leicester
Spoke to Trevor at Tett mouldings who is retiring in six weeks . He wants to try and ensure the S bonnet mouldings survive.
Does any one know of a company or business that would be interested in buying them ?
Spoke to Trevor at Tett mouldings who is retiring in six weeks . He wants to try and ensure the S bonnet mouldings survive.
Does any one know of a company or business that would be interested in buying them ?
DeadSpider said:
Many thanks bonnet bought just need to have it shipped to my body shop in Leicester
Spoke to Trevor at Tett mouldings who is retiring in six weeks . He wants to try and ensure the S bonnet mouldings survive.
Does any one know of a company or business that would be interested in buying them ?
happy to help, yes i do actually, Julian at Fibreon does TVR mouldings think mainly chimaera onwards but he did have S wheel arch mould that he did for me when i needed one, think he may be interested?Spoke to Trevor at Tett mouldings who is retiring in six weeks . He wants to try and ensure the S bonnet mouldings survive.
Does any one know of a company or business that would be interested in buying them ?
His details are on here
http://www.damagedtvrs.co.uk/
Edited by greyhulk on Monday 11th July 14:52
greyhulk said:
happy to help, yes i do actually, Julian at Fibreon does TVR mouldings think mainly chimaera onwards but he did have S wheel arch mould that he did for me when i needed one, think he may be interested?
His details are on here
http://www.damagedtvrs.co.uk/
If fibreon aren't interested, surely TVR would be? Or am i a bit naive saying this?His details are on here
http://www.damagedtvrs.co.uk/
Edited by greyhulk on Monday 11th July 14:52
deadspider,
I am the current owner of the bonnet you have purchased.
Can I suggest you start a new thread about a possible parts delivery relay. The bonnet is in Lewisham. It was fine on the Box's (a Touran) roof rack so a roof rack equiped car should be fine.
Annoyingly, I was up by Cadwell Park today so could have got it a chunk of the way there.
I am the current owner of the bonnet you have purchased.
Can I suggest you start a new thread about a possible parts delivery relay. The bonnet is in Lewisham. It was fine on the Box's (a Touran) roof rack so a roof rack equiped car should be fine.
Annoyingly, I was up by Cadwell Park today so could have got it a chunk of the way there.
DeadSpider said:
Many thanks to Dave M, Sal and Laurie S for coming to my aid very much appreciated.
Nice to meet you, shame about the circumstances.Glad to hear you got home ok, did the pressure cap hold out? I did have problems with it letting go when the temperature starts to rise, though guess you had plenty of cooling on the way back Just be aware if, when it's all back together you have issues.
Lawrie
Mine was an S,2,3 bonnet . Thankfully Stuart the one I have purchased from you will fit perfectly.
Lawrie once again thank you and the cap held perfectly, must admit it felt most surreal limping home with no bonnet.
I went back to pick the remaining bits up and it turns out I managed to hit both lampposts feeling very fortunate to have been able to drive her home.
Lawrie once again thank you and the cap held perfectly, must admit it felt most surreal limping home with no bonnet.
I went back to pick the remaining bits up and it turns out I managed to hit both lampposts feeling very fortunate to have been able to drive her home.
If the radiator is borked then have a look at using a Subaru Impreza STi (99-2004 iirc) item instead of the 'proper' one as an alloy one is a fifth the price of the TVR item. Plentyfull supply too. The mount will need a little tweak but basic stuff. Size is fine. New rad, fan, mounts and clips can all be had for around £160.
If you can salvage the lower light pods these can be grafted onto the S1/2 bonnet so might be worth considering. Also try and salvage the rubber bump strips and indicators.
If the indicator lenses are busted then some BMW E36 lenses fit.
Finally, may as well do the 'open wide' mod at the same time.
Got your text. I'm in all day doing paperwork and digging out the garden. If the courier calls me, I'll meet them and take them to the garage.
If you can salvage the lower light pods these can be grafted onto the S1/2 bonnet so might be worth considering. Also try and salvage the rubber bump strips and indicators.
If the indicator lenses are busted then some BMW E36 lenses fit.
Finally, may as well do the 'open wide' mod at the same time.
Got your text. I'm in all day doing paperwork and digging out the garden. If the courier calls me, I'll meet them and take them to the garage.
mk1fan said:
If the radiator is borked then have a look at using a Subaru Impreza STi (99-2004 iirc) item instead of the 'proper' one as an alloy one is a fifth the price of the TVR item.
I was actually looking to replace my S1 rad with an ally one while my system is drained out so may be able to help out here.. (Got it re-cored last year, works fine)Would happily sell it if I could find replacement ally one which ain't £500
In regards to the Subaru one, I take it the act stainless water pipes I just got wouldn't fit?
Edited by greyhulk on Wednesday 13th July 09:20
Gassing Station | S Series | Top of Page | What's New | My Stuff