TVR Logo - Laser Cut Stainless Steel

[Incognegro]

TVRees said:

Recently has these "2 layer" TVR logos made locally.

The logo layout is from a self-made CAD file (.dxf file is available) and the cost was approx. £4 per individual piece.

The ones shown in the photo are 13 x 5 cm, and smaller will also be possible.

If anyone wants the .dxf or .sldprt (Solidworks) files, drop me a PersMail.

This is great. Haven't measured yet but would be interested in this to go in the TVR recess on the speed six cam cover. Is that the purpose of this?

Let me know more cost etc.

Regards

[TVRees]

Incognegro said:

This is great. Haven't measured yet but would be interested in this to go in the TVR recess on the speed six cam cover. Is that the purpose of this?
Let me know more cost etc.
Regards

As mentioned, these were 13x5cm and were really just an exercise for me to learn how to use a CAD program. Since I do not have a Speed Six engine, I'm not sure what size is required for the cam cover recess, but this was not the original intention. I will use these incorporated in some stainless door sill plates and a rear plate to go above the exhaust in the S cars.
The 13x5 can be proportionally scaled down, no problem.
The cost is also mentioned above and I suppose the only problem is that I am not in the UK, but in Hungary, so the postage will be a few quid, depending on the required service.

Tim

[Incognegro]

TVRees said:

As mentioned, these were 13x5cm and were really just an exercise for me to learn how to use a CAD program. Since I do not have a Speed Six engine, I'm not sure what size is required for the cam cover recess, but this was not the original intention. I will use these incorporated in some stainless door sill plates and a rear plate to go above the exhaust in the S cars.
The 13x5 can be proportionally scaled down, no problem.
The cost is also mentioned above and I suppose the only problem is that I am not in the UK, but in Hungary, so the postage will be a few quid, depending on the required service.

Tim

Hi Tim,

Thanks for your response very good of you. When the cam cover comes back in I'll measure and send you an Ali file if you like? My only alternative as I can no longer find the domed vinyl versions ecosse TVR did would be to have the recess chrome wrapped.

Happy to cover your costs mate