Rolling Road - Aberdeen(shire)?

[FezzaDezza]

Anyone know of a good rolling road in / around Aberdeen ? Looking to get some before and after power runs done.

Cheers

Des

[Mizzdaizee]

Wallace Performance, Units 17 & 18, Murcar Commercial Park, Bridge of Don, Aberdeen, AB23 8JW.

A couple of my friends use them quite a bit.

[FezzaDezza]

Cheers for that ! Any idea of an approx cost ? Assume between 300-350bhp wont be a problem ?

Cheers

Des

[spunky-mon]

jap performance up in ellon. not sure on contact info, sure a google search will find them.

jim king, i think he has one, infact im sure he does.

ricky gauld? ( would recomend him as he does alot of work on my dads kit car and it is always running sweet)

Edited by spunky-mon on Friday 31st August 17:41

[FezzaDezza]

Juet spoke to Wallace Perf, will be £50 per pop and I need before and after runs so going to sting me £100! Just interested to know what gains I'll get from a decat, sports exhaust and K&N, hoping for circa 30-40hp.

[Vixpy1]

FezzaDezza said:

Juet spoke to Wallace Perf, will be £50 per pop and I need before and after runs so going to sting me £100! Just interested to know what gains I'll get from a decat, sports exhaust and K&N, hoping for circa 30-40hp.

On which car?

[gofasterrosssco]

Vixpy1 said:

FezzaDezza said:

Juet spoke to Wallace Perf, will be £50 per pop and I need before and after runs so going to sting me £100! Just interested to know what gains I'll get from a decat, sports exhaust and K&N, hoping for circa 30-40hp.

On which car?

VXR 6.0 or Audi RS6 going by that mod to gain ratio

[spunky-mon]

[quote=FezzaDezza]quote]

yhm

[Kiltie]

Vixpy1 said:

something

Jeez! we're honoured!

Never seen you in our little sleepy hollow of PH before.

Come in, take your shoes off and make yourself at home.

Cheers,

Eric

[Vixpy1]

Kiltie said:

Vixpy1 said:

something

Jeez! we're honoured!

Never seen you in our little sleepy hollow of PH before.

Come in, take your shoes off and make yourself at home.

Cheers,

Eric

A better welcome one could not wish for

[FezzaDezza]

Vixpy1 said:

FezzaDezza said:

Juet spoke to Wallace Perf, will be £50 per pop and I need before and after runs so going to sting me £100! Just interested to know what gains I'll get from a decat, sports exhaust and K&N, hoping for circa 30-40hp.

On which car?

Ferrari 348ts, chap down under got 20Bhp (proved on rolling road before and after) just by changing stock system to X-Ost. I'm hoping removing the cats and further improved breathing with a K&N might squeeze out another 10-15bhp. 40bhp total is perhaps a little optimistic though but I'm pretty sure 30-35bhp is obtainable!

http://www.ferrarichat.com/forum/showthread.php?t=...

Other good thing is it will save about 25kgs in weight and keep the engine bay much cooler, not to mention the awsome sound !!!

Edited by FezzaDezza on Saturday 1st September 13:34

Edited by FezzaDezza on Saturday 1st September 13:49

[Broomsticklady]

Vixpy1 said:

Kiltie said:

Vixpy1 said:

something

Jeez! we're honoured!

Never seen you in our little sleepy hollow of PH before.

Come in, take your shoes off and make yourself at home.

Cheers,

Eric

A better welcome one could not wish for

Our reputation for a high standard of forum content (and tomgue in cheek abuse!) must be spreading throughout the PH world ... assisted ablely of course by your insistence high grammtical and spelling standards, and that beautiful lilac car, Eric!!

[craig2003]

I use Wallace myself and find them to be spot on everytime. Back down there myself next week for a service and tuning.
Russ is a top bloke

[istoo]

am i correct in thinking wallace are 4wd rollers and everyone else is on 2wd?

[AndyAudi]

istoo said:

am i correct in thinking wallace are 4wd rollers and everyone else is on 2wd?

Think so

[BobbyL]

I have used Wallace a couple of times and the work that Russ provides is A1, bit costly but good service.

[FezzaDezza]

istoo said:

am i correct in thinking wallace are 4wd rollers and everyone else is on 2wd?

Yup, 2 x 800bhp rollers, 1600bhp 4wd should be enough for most !!!

[JohnCL]

Has anyone put a kit car with low ground clearance on any local rollers successfully. I tried at Ricky Gauld's but first the wheels spun on the rollers but then when I got in to add "some" weight (no rude remarks please!!) it bottomed out.

John

[hollowpockets]

JohnCL said:

Has anyone put a kit car with low ground clearance on any local rollers successfully. I tried at Ricky Gauld's but first the wheels spun on the rollers but then when I got in to add "some" weight (no rude remarks please!!) it bottomed out.

John

i think the dastek rollers in fife are the best iv seen for ground clearance, from what i remember better than wallace's

[G4Addicted]

JohnCL said:

Has anyone put a kit car with low ground clearance on any local rollers successfully. I tried at Ricky Gauld's but first the wheels spun on the rollers but then when I got in to add "some" weight (no rude remarks please!!) it bottomed out.

John

I know the problem, John - when we put the G22 on the rollers (40mm ground clearance!)we had to put the front wheels on ramps so that the car was sitting on the rollers at an angle - it looked a little odd, and you had the fear all the time that it was about to luanch into space, but it worked fine when tied down. We also put some larger road wheels in the back, so as not to sh*g the race tyres on the rollers...