Clonk...Clunk....Clink....

[superwedge]

[mrzigazaga]

Cool...So does the other one the other side of the plate have just one on the outside?...Cheers...Ziga

Sorry didn't see the pics..So 2 of each per side...I can only find two of the washers with collars...I found the others but no more collars..I have emailed the guy you forwarded...Fingers crossed...

Edited by mrzigazaga on Wednesday 1st October 19:25

[superwedge]

you got this both sides back to back, it sits in the frame off the car,the shine one goes to the car,and the same the other way,

[mrzigazaga]

Well i managed to find two of the inner washers but thats it...I spent most of yesterday searching and thats all i came up with..What a load of rubbish!...Looks like I'm going to have to pay through the nose for someone to make them...What a joke!...The outers are available but its £30 for 4...Piss takers....I think i will just put up with the clonking..If something snaps then its goodbye TVR's...Ziga

[gmw9666]

the joys of having striped a wedge to bits.........garage full of crap still lol

these?

4 knackered bushes with their internal collars, 4 thicker external washers and 4 internal thinner washers

per our email, the 420SE looks like she doesn't have the inner ones so likely to keep these so add on mine but if you need dims or anything just holla

[mrzigazaga]

Cheers Glen...Ill nick those off of you if i can...I have found 2 x inner washers but struggling to find anymore...I would of used my old ones but they were toast...Ziga

[jon haines]

Zig I had a similar thing with mine but I ahd replaced all the bushes a few years ago so wasnt anything to do with that but it was a crack/split in the front chassis leg which was discovered at mot time.

[superwedge]

get them washer;s on zig

[mrzigazaga]

jon haines said:

Zig I had a similar thing with mine but I ahd replaced all the bushes a few years ago so wasnt anything to do with that but it was a crack/split in the front chassis leg which was discovered at mot time.

Oooowwwahhh....Well i hope its not that...I will find out tomorrow...I did have a fracture on one of the centre tubes on the weld but that has been welded..Ill get the MOT inspector to have a good look tomorrow, But i think it might be the washers or lack of that are causing it....(Theres always hope)...Cheers.. Ziga