HT Leads....what flavour?
Discussion
mrzigazaga said:
Hi Dave.
I see you have the metal shrouds...I had two fail on me...I think I still have them so if you need some spares then I will put them aside for the next time we meet...
Ziga
Cheers Mark, that's very kind but I've long since moved on the those dreadful plug extenders as they're a well known point of failure on Chimaeras.I see you have the metal shrouds...I had two fail on me...I think I still have them so if you need some spares then I will put them aside for the next time we meet...
Ziga
Here's how I solved that one once and for all...
1. Buy decent leads with plug ends that have good resistance to heat like these MSD Super Conductors
2. Buy a 6' roll of MSD Pro-Boot Guard
3. Cut the MSD Pro-Boot Guard roll into 10" lengths & fit over the plug ends, this image shows the Pro-Boot Guard part way on, when fully fitted it goes over & right up to the very end of the grey MSD plug end
4. Fit a DEI Titanium Protect-A-Boot over the whole lot with the steel ring inside the Protect-A-Boot at the plug end, only use DEI Titanium Protect-A-Boots, the cheaper woven fiberglass boots are not up to the job
5. Repeat steps 1-4 eight times
6. Crimp your coil/distributor ends, the MSD Super Conductor universal kit comes with two types of distributor ends and a basic but effective crimp die in the box. Details here:
http://www.circletrack.com/enginetech/ctrp_1106_do...
BTW, we still need to sort my little trimming jobs mate, and I want you to do it, I'll be in touch soon my friend.
mrzigazaga said:
Good move mate...That looks neat what you have done there...something to ponder on...Thanks
Ziga
I've been running the above setup for a few years now and it's been perfect Mark.Ziga
Keep in mind the forward facing manifolds on the Chimaera present a greater challenge, they are brutal on plug ends which is why TVR used the Beru plug extenders, unfortunately these extenders are themselves an unreliable point of failure so deleting them was always my objective.
Burning LPG is super hard on ignition components because the fuel is far harder to strike than petrol, once combustion is initiated it actually burns more completely than petrol but you need a good spark with a long duration to get gas burning in the first place. LPG killed my Magnacors in short order, so I switched to MSD Super Conductor HT leads which are the absolute Mutt's Nuts. With my double heat insulation arrangement they are bullet proof in fact which is what I need, but I freely admit the whole setup was rather expensive.
My extra heat insulated MSD Super Conductor setup is of course completely unnecessary if you're just burning petrol and you have Wedge manifolds which are far kinder on the plug ends than the forward throw Chim & Griff manifolds. Quite simply what petrol drinkers should buy is a set of Bosch leads for a Range Rover, and looking back over this post I can see you've actually suggested the same. My link shows them at £25 but you seem to have found the same Bosch lead set for just £20, clearly your Googling skills are better than mine Mark
And lets face it, £20 for a set of 8 plug & play high quality Bosch plug leads (with a king lead included the set too).... is an absolute no-brainer mate
K
New leads (Zig and Chimp recommended) Bosch fleabay.
Plugs NGK new. (less than £20 for the set)
Dizzy cap and rotor arm from Distributor doctor.....
and she pulls like a train, snow or nee snow.
Roof down (not) but no photographic evidence to prove otherwise !! (Zig you fanny)
New wiper arm and blade as well.
Great day.
Had an invite to Goodwood members (chimp and Frenchie) meet but couldn't make it.
Got productive despite the weather and pleased as punch.
New leads (Zig and Chimp recommended) Bosch fleabay.
Plugs NGK new. (less than £20 for the set)
Dizzy cap and rotor arm from Distributor doctor.....
and she pulls like a train, snow or nee snow.
Roof down (not) but no photographic evidence to prove otherwise !! (Zig you fanny)
New wiper arm and blade as well.
Great day.
Had an invite to Goodwood members (chimp and Frenchie) meet but couldn't make it.
Got productive despite the weather and pleased as punch.
Gassing Station | Wedges | Top of Page | What's New | My Stuff