Under front bumper
Discussion
Bit of an odd one, does anyone mind taking a picture of what their wedge looks like from behind/under the front bumper.
i ask because mine has a piece of ally riveted in between the bottom of the bumper and another bit of the car, presumably to stop water splashing up, wondering what was there originally.
Cheers
i ask because mine has a piece of ally riveted in between the bottom of the bumper and another bit of the car, presumably to stop water splashing up, wondering what was there originally.
Cheers
bradderztvr said:
Zig.....didn't know she could fly!
Well not quite yet flying...Its just a light hover at the mo..I had a bit of a mis-fire as well so thats not good when hovering ..After removing the wheels we managed to break the 5 feet hover barrier...I would say the mesh is definitely easier to replace with the car in the air...Although don't rely on hovering alone as it was built by TVR...
jindle said:
That mesh looks quality mate.
However I actually meant behind the spoiler: so at the very back of the spoiler, someone has riveted a little peice of ally to join up to another part of the body, presumably to stop water splashing up and to keep it all a little more stable.
Mmm...Not sure where you mean...A pic would help mate...However I actually meant behind the spoiler: so at the very back of the spoiler, someone has riveted a little peice of ally to join up to another part of the body, presumably to stop water splashing up and to keep it all a little more stable.
That looks like the rad has been out at some point as we had to do similar with mine when we replaced the rad,,,There is a piece if fibreglass there that looks like a long tray..It does seem to vent upwards...Yours looks neatly modified...Mine was just fired at with a bolt gun.......
colin mee said:
Just looking at fitting the mesh on the front.looks like I need to take the front spoiler off.or is there a easier way
How is yours held on...Mine was riveted to that flat bar you can see in the pic so they were drilled out..The bottom was just flapping around..My mesh was also rotten so it was easy to pull it off...Have you managed to get the front up in the air a bit?Gassing Station | Wedges | Top of Page | What's New | My Stuff