Headlight Lifting Mechanism

[TVRleigh_BBWR]

if JC can't find any I can make some up.

[John042]

Thanks Leigh. If Marcus can't locate one I'm certainly in the market for one. Disappointed with the TR one which looked identical except for the pin length. J C .

[marcus1875]

Yhm John.
I'll pick my spare up today or tomorrow.

Marcus

[marcus1875]

Hopefully this is what you need John. I take it you need both parts of the arm? PM me your address and i'll clean it up a bit and send it down to you.
Marcus

[John042]

Thanks Marcus. I've just tried to send you an e-mail as I measured the pin that attaches to the adjustable arm and compared it with the other side on my car. The TR one is 14mm the other 22mm. No wonder the circlip would't go on. So yes please can you send both links as maybe my adjustable link is not from a TVR. I'll use my other tablet to send you my address. Thankyou Marcus for your help. John C

[John042]

Deep Joy, I now have headlights which work. Nearly flattened the battery I was so excited with their operation. Thanks to Marcus1875 I've managed to construct a working linkage. Cheers Mate a splendid result. Still don't flash though, if that function was fitted? However another gremlin appeared in that initial turning the ignition key has no effect. No dimming of ignition lights etc. Tapping the relays/fuses it eventually starts. I'm now wondering if the new start relay I bought is at fault. Further grovelling under the dash I think next weekend. Don't mind, I've got the headlights working. Cheers J C.