Tasmin S1 Rear Brake Pads

[v8s4me]

What OE fitting do I look for when shopping for rear brake pads for a 1981 S1 FHC? Thanks in advance.

[mrzigazaga]

Hi mate


The back axle set up is XJS/6 so the pads will be the same as..

You could give these guys a try.....
https://www.google.co.uk/url?sa=t&rct=j&q=...

[v8s4me]

So are these the correct pads then?

http://www.brakebook.com/pim42/upload/TMDImages/no...

[Campbell]

They look about right.
I can look at mine as on the RNR runnthis weekend but would also recommend changing out the hand brake pads aswell, not an easy job and they last a long time but they can separate from the metal plates quite easily so i think its worth while looking into that too.

[v8s4me]

I think my off-side handbrake is seized so I was going to change the main braking pads while I was under there. At least I hope it's just a seized pivot bolt and not a completely seized caliper.