What's happening in your garage this weekend ?
Discussion
Need to adjust the window channels on mine - I replaced the front ones with another pair from another 350i I had had blasted and powdercoated.
But as the buggers hand-built the cars and everything is of different dimension, the windows are a bit sticking at the moment. Need to create a bit more spacing at the top end, and also move the bottom end outwards on the back channel so that the lock tab won't hit it.
Fiddly stuff, but not too tricky.
Note to people - the triangle bits the mirror pods are mounted to rust badly. And the mirror mounting bolts rust like things that love to rust. Stainless bolts for the mounting and waxoyl / stickier stuff for the triangle sheet metal should prevent nasty surprises later on...
Also, need to finally connect the wires for the new (*cough* E30 bits from fleabay *cough*) mirror actuators. The mirrors work off-car, but need to be tried with the wiring in place.
But as the buggers hand-built the cars and everything is of different dimension, the windows are a bit sticking at the moment. Need to create a bit more spacing at the top end, and also move the bottom end outwards on the back channel so that the lock tab won't hit it.
Fiddly stuff, but not too tricky.
Note to people - the triangle bits the mirror pods are mounted to rust badly. And the mirror mounting bolts rust like things that love to rust. Stainless bolts for the mounting and waxoyl / stickier stuff for the triangle sheet metal should prevent nasty surprises later on...
Also, need to finally connect the wires for the new (*cough* E30 bits from fleabay *cough*) mirror actuators. The mirrors work off-car, but need to be tried with the wiring in place.
hrepo said:
Note to people - the triangle bits the mirror pods are mounted to rust badly. And the mirror mounting bolts rust like things that love to rust.
Hi mateThanks for that heads up...It could explain why my O/S mirror pod is a bit wobbly, the plan was to just tighten the bolts...however it is 30 years old...
Cheers
Ziga
gmw9666 said:
Weekend off so getting bladdered
Third scrumpy cider nailed. I'll race you Glen..... no Wedge work for me. Collecting Audio estate tomorrow after using the 350i as the daily driver for the last 5 weeks. I'm now on first name terms with all local fuel station staff. Hill walking Sunday, playing bouncer at court hearing for nieces messy divorce Monday and business trip to wrong side of country Tuesday. Edited by KKson on Friday 5th May 21:22
Well, she's back from the 2 Phil's with a new head gaskets, cam, followers, timing chain/gears, water pump, oil pump, oil pressure sender, coolant hoses, radiator and clutch !!!
Passed MOT(just had to wiggle connector for osf indicator) and taxed her.
Plus replacement exhaust manifolds courtesy of Wayne (I'll paint em yellow mate)
Passed MOT(just had to wiggle connector for osf indicator) and taxed her.
Plus replacement exhaust manifolds courtesy of Wayne (I'll paint em yellow mate)
Gassing Station | Wedges | Top of Page | What's New | My Stuff