Discussion
Hi Steve,
The cars ok thanks, going to get it back on the rollers though because it feels like its underfueling a bit now since i last had it tuned to go to Bruntingthorpe, after that the spending stops until the new year..well on the big bits anyway!
Saw the SEAC looking very shiney in this months Sprint at Gang on the Green, You still terrorising the locals?
Andy.
The cars ok thanks, going to get it back on the rollers though because it feels like its underfueling a bit now since i last had it tuned to go to Bruntingthorpe, after that the spending stops until the new year..well on the big bits anyway!
Saw the SEAC looking very shiney in this months Sprint at Gang on the Green, You still terrorising the locals?
Andy.
AM400 said:
Hi Steve,
The cars ok thanks, going to get it back on the rollers though because it feels like its underfueling a bit now since i last had it tuned to go to Bruntingthorpe, after that the spending stops until the new year..well on the big bits anyway!
Saw the SEAC looking very shiney in this months Sprint at Gang on the Green, You still terrorising the locals?
Andy.
Glad all is well Andy,my garage will soon be up so i can terrorise some new locals
Won best Wedge at the BNG so with abit of luck i might be in next months Sprint too
Steve
edited to add that would make it 3 in a row
>> Edited by stainless_steve on Friday 12th September 22:20
Did a bit of searching
www.pistonheads.com/gassing/topic.asp?t=3682&f=12&h=0&hw=build+numbers
Try this?
www.pistonheads.com/gassing/topic.asp?t=3682&f=12&h=0&hw=build+numbers
Try this?
jmorgan said:That works for VIN numbered cars, I can't find anything for pre-VIN cars.
Did a bit of searching
www.pistonheads.com/gassing/topic.asp?t=3682&f=12&h=0&hw=build+numbers
Try this?
Hope this helps.
TVR had their own numbering system pre vin plates which came in around mid 1985.
The 400SE should follow this system:-
For example SA9DH28PXFBO19433
S = made in UK
A = Less than 500 cars per annum
9 ?
D= type of body DH drop head (FH fixed head)
H = weight class 3001-4000lbs GVW
28 = Engine size 28=2.8 Ford v6 35=3.5 V8 40 = etc
P = Fuel type (petrol)
X = Vin verification check
F = Manufacturing year F=1985 G=1986 etc
B = Manufacturing plant B=Blackpool
019= International code, designating TVR 280 and 350
fhc and dh from TVR factory address
433 = sequential build number.
I hope this answers your question. Remember that TVR were building the "S" at the same time as the 400, so the final 3 digits will not tell you exactly where abouts in wedge production your car actually sits.
Nige'
Nige'
TVR had their own numbering system pre vin plates which came in around mid 1985.
The 400SE should follow this system:-
For example SA9DH28PXFBO19433
S = made in UK
A = Less than 500 cars per annum
9 ?
D= type of body DH drop head (FH fixed head)
H = weight class 3001-4000lbs GVW
28 = Engine size 28=2.8 Ford v6 35=3.5 V8 40 = etc
P = Fuel type (petrol)
X = Vin verification check
F = Manufacturing year F=1985 G=1986 etc
B = Manufacturing plant B=Blackpool
019= International code, designating TVR 280 and 350
fhc and dh from TVR factory address
433 = sequential build number.
I hope this answers your question. Remember that TVR were building the "S" at the same time as the 400, so the final 3 digits will not tell you exactly where abouts in wedge production your car actually sits.
Nige'
Nige'
Gassing Station | Wedges | Top of Page | What's New | My Stuff