TradeMe car thread
Discussion
Who's feeling brave?!
http://www.trademe.co.nz/a.aspx?id=546517801
As if the misprint in the title wasn't bad enough, the photo is out of focus and the details are sketchy to say the least
http://www.trademe.co.nz/a.aspx?id=546517801
As if the misprint in the title wasn't bad enough, the photo is out of focus and the details are sketchy to say the least
While on the topic of engines (and a little off the trademe track).
http://www.ebay.com/itm/Chevrolet-IRL-Indy-car-eng...
I'd love to throw one of these in my single seat offroader..... however nobody makes a dropgear offroad race box that I can mate to her. (it's still tempting to run some glass over the airbox and call it a coffee table).
http://www.ebay.com/itm/Chevrolet-IRL-Indy-car-eng...
I'd love to throw one of these in my single seat offroader..... however nobody makes a dropgear offroad race box that I can mate to her. (it's still tempting to run some glass over the airbox and call it a coffee table).
Edited by HellK9 on Thursday 21st February 05:16
TVR Cerbera that is "pretty much ready for re-assembling" and certification 
http://www.trademe.co.nz/a.aspx?id=565321149
TVR Cerbera AJP 1997
Asking price: $35,000
Listed: Thu, 21 Feb
On Road Costs: Excluded - additional costs may apply.
Kilometres: 60,000km
Body: Red Burgundy, 2 door, Coupe
Fuel type: Petrol
Engine: 8 cylinder, 4200cc, Manual
Import history: Imported
Registration expires: No Registration
WOF expires: No WOF
Stereo description: CD Tuner
Features: Air conditioning
Alarm
Alloy wheels
Central locking
Power steering
Project Alert!
This car is pretty much ready to re-assemble, and located in Auckland.
I imported this Cerb from Ireland about 2 years ago, and only when it landed did I find it had a lot of chassis rust. I drove it through Ireland, and had a ball doing so. It was road registered and legal over there. Since then the car has been fully stripped, chassis repaired, bead blasted and powdercoated. All the brackets, mounts etc have been stripped, blasted and powdercoated as well. All work has been carried out by the master of TVR, Jim Gamsby, and it is currently in his workshop. Unfortunately it is time for me to quit this project, so I am hoping to sell it as an ongoing concern. It has cost me just on $50,000 to date, with approiximately another $15000 to see it on the road. I am making a huge loss on this, you would be doing well to bring one into the country for this price, even after completing the job. Includes 2 key/immobilsers, and a set of race pipes as well.
New parts include AC Racing 5 plate clutch, Radiator, A/C radiator, Handbrake, stainless coolant pipes, front and rear upper suspension arms, driveshaft boots, gearbox mounts, upgraded engine mounts, front&rear A/R drop links and bushes, stainless brake hose kit, PAS reservoir, rear wheel bearings, driveshaft cv joint, alternator belt, A/C drive belt, diff mounts, diff top bracket, suspension bush kit front and rear, drag strut bushes, radiator mounts, steering column U/J, wheel nuts, rear brake discs, plus much more.
Speedo reads 47,000 Miles
http://www.trademe.co.nz/a.aspx?id=565321149
TVR Cerbera AJP 1997
Asking price: $35,000
Listed: Thu, 21 Feb
On Road Costs: Excluded - additional costs may apply.
Kilometres: 60,000km
Body: Red Burgundy, 2 door, Coupe
Fuel type: Petrol
Engine: 8 cylinder, 4200cc, Manual
Import history: Imported
Registration expires: No Registration
WOF expires: No WOF
Stereo description: CD Tuner
Features: Air conditioning
Alarm
Alloy wheels
Central locking
Power steering
Project Alert!
This car is pretty much ready to re-assemble, and located in Auckland.
I imported this Cerb from Ireland about 2 years ago, and only when it landed did I find it had a lot of chassis rust. I drove it through Ireland, and had a ball doing so. It was road registered and legal over there. Since then the car has been fully stripped, chassis repaired, bead blasted and powdercoated. All the brackets, mounts etc have been stripped, blasted and powdercoated as well. All work has been carried out by the master of TVR, Jim Gamsby, and it is currently in his workshop. Unfortunately it is time for me to quit this project, so I am hoping to sell it as an ongoing concern. It has cost me just on $50,000 to date, with approiximately another $15000 to see it on the road. I am making a huge loss on this, you would be doing well to bring one into the country for this price, even after completing the job. Includes 2 key/immobilsers, and a set of race pipes as well.
New parts include AC Racing 5 plate clutch, Radiator, A/C radiator, Handbrake, stainless coolant pipes, front and rear upper suspension arms, driveshaft boots, gearbox mounts, upgraded engine mounts, front&rear A/R drop links and bushes, stainless brake hose kit, PAS reservoir, rear wheel bearings, driveshaft cv joint, alternator belt, A/C drive belt, diff mounts, diff top bracket, suspension bush kit front and rear, drag strut bushes, radiator mounts, steering column U/J, wheel nuts, rear brake discs, plus much more.
Speedo reads 47,000 Miles
1966 Batmobile
whoops - just expired, maybe view it cached
whoops - just expired, maybe view it cached
Edited by mark387mw on Sunday 24th February 05:46
Caterhamfan said:
TVR Cerbera that is "pretty much ready for re-assembling" and certification
http://www.trademe.co.nz/a.aspx?id=565321149
That link is not working so this one may help....http://www.trademe.co.nz/a.aspx?id=565321149
http://www.trademe.co.nz/motors/used-cars/other/au...
If anyone needs a project MX5 or ideal for new/learner driver 
http://www.trademe.co.nz/Browse/Listing.aspx?id=56...
http://www.trademe.co.nz/Browse/Listing.aspx?id=56...
mark387mw said:
If anyone needs a project MX5 or ideal for new/learner driver
http://www.trademe.co.nz/Browse/Listing.aspx?id=56...
FWIW I just sold one the same with 217,000 ks and a hardtop for $2,700. Took three months for anyone to come look at it then the first person who did bought it.http://www.trademe.co.nz/Browse/Listing.aspx?id=56...
Hi Caterhamfan
Not much use to you but I knew one of the previous owners of that particular Cerbera in Ireland, I had a 1998 4.2 at the same time and we has a few good runs on the track. I remember it was a very quick car at the time.I've seen it in Jims and it'll be a very good example when its finished. Jim's done a terrific job.
Not much use to you but I knew one of the previous owners of that particular Cerbera in Ireland, I had a 1998 4.2 at the same time and we has a few good runs on the track. I remember it was a very quick car at the time.I've seen it in Jims and it'll be a very good example when its finished. Jim's done a terrific job.
If anyone wants a really good quality car transport cover have a look at my post. It was a size too small for my car due to a bit of a mix up so its for sale at a bargain price.
http://www.trademe.co.nz/Browse/Listing.aspx?id=56...
http://www.trademe.co.nz/Browse/Listing.aspx?id=56...
This guy in Christchurch normally brings in Corvettes from Japan but now his trying is hand at TVR.
He has 2 Chimeras coming.
http://www.trademe.co.nz/motors/used-cars/other/au...
http://www.trademe.co.nz/motors/used-cars/other/au...
He has 2 Chimeras coming.
http://www.trademe.co.nz/motors/used-cars/other/au...
http://www.trademe.co.nz/motors/used-cars/other/au...
Im bored with threads about emmigrating - its time to talk about cars.
I saw this advertised in the Press today
http://www.euromarque.co.nz/display?vehicle_id=378...
Cant be many others in the country.
I saw this advertised in the Press today
http://www.euromarque.co.nz/display?vehicle_id=378...
Cant be many others in the country.
Gassing Station | New Zealand | Top of Page | What's New | My Stuff