Decent welder near Billericay?

[Andy 308GTB]

Suspension A-Arm.
I need the welds that hold a metal plate in place ground off.
The plate repositioned by 5mm and then welded back.
A mixture of seam and tack welds.

Not a huge job but it needs to be accurate and because it's a suspension part and the plate is structural, properly done.

I also need 16 bushings to be tacked in place.

Any suggestions - obviously I can go beyond Billericay but the nearer the better.

Thanks in advance...

[garagewidow]

I've used these several times for my ally work as I just can't justify buying a decent tig myself.they do good work and are very reasonable for cost.

http://finelimitwelding.moonfruit.com/

[Andy 308GTB]

garagewidow said:

I've used these several times for my ally work as I just can't justify buying a decent tig myself.they do good work and are very reasonable for cost.

http://finelimitwelding.moonfruit.com/

Thanks very much.
I had found them on Google and thought they looked the part but your endorsement pulls the trigger for me!

[Andy 308GTB]

I dropped my stuff off at Fine Limit Welding this morning. They were very impressive and very helpful - I have high hopes for a good outcome.

[Andy 308GTB]

Andy 308GTB said:

I dropped my stuff off at Fine Limit Welding this morning. They were very impressive and very helpful - I have high hopes for a good outcome.

My hopes were fully justified - beautiful work and very helpful. I would thoroughly recommend them.

[chilistrucker]

Andy 308GTB said:

My hopes were fully justified - beautiful work and very helpful. I would thoroughly recommend them.

The joy of PH