Angle Iron/ Box section wanted
Discussion
So far I have a grinder, a 44 gallon drum, and a motorised rotisserie. I just need to make a frame for it all
Does anyone have some angle iron or steel box section around that they would be willing to sell. I need about 5 metres in total.
I know it is available of ebay brand new, but it is fairly expensive for both the metal and shipping.
I feel a good kiwi SAS BBQ meet coming on the events list soon...
Does anyone have some angle iron or steel box section around that they would be willing to sell. I need about 5 metres in total.
I know it is available of ebay brand new, but it is fairly expensive for both the metal and shipping.
I feel a good kiwi SAS BBQ meet coming on the events list soon...
How much charcoal can you get in one of these?
http://cgi.ebay.co.uk/mercedes-hard-top_W0QQitemZ3...
Have some old dexion shelving in t'shed, not sure how long the side bits are off the top of my head tho
http://cgi.ebay.co.uk/mercedes-hard-top_W0QQitemZ3...
Have some old dexion shelving in t'shed, not sure how long the side bits are off the top of my head tho
Dexion might do the trick! Is it the home sized stuff with the angle iron corners about 25mm wide?
I only need shortish lengths for 4 legs, then a couple of pieces to mount the rotisserie on.
Happy to buy it off you with cash/ beer/ bbq food if you care to look it out.
BTW - I did think about using something car related to build it (boot lid, etc), but 44 gallon drums just work so well!
I only need shortish lengths for 4 legs, then a couple of pieces to mount the rotisserie on.
Happy to buy it off you with cash/ beer/ bbq food if you care to look it out.
BTW - I did think about using something car related to build it (boot lid, etc), but 44 gallon drums just work so well!
Motown Junk said:
How much charcoal can you get in one of these?
http://cgi.ebay.co.uk/mercedes-hard-top_W0QQitemZ3...
For a second their I though you had found a certain 300SL for sale soon, could make a great bbq if we can get the roof of http://cgi.ebay.co.uk/mercedes-hard-top_W0QQitemZ3...
VerySideways said:
I'm quite handy with a welder if you need some help.
Brilliant! My welding wasn't too bad a few years ago, but the main problem now is... I don't have a welder. I was going to bolt it together, but will definitely take you up on the offer if you don't mind Pete.I think this BBQ is going to need tested at or place sometime in April
I have a 300 Arc Tech set down the lock up. (Camberley)
But you would need to bring the items down there.
Drills and Grinders too. (for cutting drum open)
Also have tube bender but no suitable tube or box section unless you want
heavy gauge 60mm tube.
Can meet you down there early evening next week.
But you would need to bring the items down there.
Drills and Grinders too. (for cutting drum open)
Also have tube bender but no suitable tube or box section unless you want
heavy gauge 60mm tube.
Can meet you down there early evening next week.
Tvrjock said:
Hi Fraser
I can gve you enough 2 x1 inch steel box section and ive got a mig with gas, you can have the steel bit i would need the Mig back
Graeme
Graeme, ill definitely take you up on the steel please. Ill send you an email tomorrow to arrange it if that's ok. Cheers! I can gve you enough 2 x1 inch steel box section and ive got a mig with gas, you can have the steel bit i would need the Mig back
Graeme
Edited by kiwifraser on Thursday 19th March 19:48
SVTRick said:
I have a 300 Arc Tech set down the lock up. (Camberley)
But you would need to bring the items down there.
Drills and Grinders too. (for cutting drum open)
Also have tube bender but no suitable tube or box section unless you want
heavy gauge 60mm tube .
Can meet you down there early evening next week.
Ricki, the workshop sounds like a great idea! Ill get everything cut up beforehand to make it easier. Are you out for a drink at the Stag tomorrow? But you would need to bring the items down there.
Drills and Grinders too. (for cutting drum open)
Also have tube bender but no suitable tube or box section unless you want
heavy gauge 60mm tube .
Can meet you down there early evening next week.
kiwifraser said:
Tvrjock said:
Hi Fraser
I can gve you enough 2 x1 inch steel box section and ive got a mig with gas, you can have the steel bit i would need the Mig back
Graeme
Graeme, ill definitely take you up on the steel please. Ill send you an email tomorrow to arrange it if that's ok. Cheers! I can gve you enough 2 x1 inch steel box section and ive got a mig with gas, you can have the steel bit i would need the Mig back
Graeme
Edited by kiwifraser on Thursday 19th March 19:48
Motown Junk said:
kiwifraser said:
Tvrjock said:
Hi Fraser
I can gve you enough 2 x1 inch steel box section and ive got a mig with gas, you can have the steel bit i would need the Mig back
Graeme
Graeme, ill definitely take you up on the steel please. Ill send you an email tomorrow to arrange it if that's ok. Cheers! I can gve you enough 2 x1 inch steel box section and ive got a mig with gas, you can have the steel bit i would need the Mig back
Graeme
Edited by kiwifraser on Thursday 19th March 19:48
Gassing Station | Thames Valley & Surrey | Top of Page | What's New | My Stuff