TVR Headlamp reflectors
Discussion
Having trawled through lots of threads, it seems that the headlamp reflectors for my Cerbera, Bosch part number 1 305 314 930, are no longer available.
The alternative Bosch part number, 1 305 314 929, is available and is still produced. From reading other threads the only difference is the location of the sidelight bulb. However, the part number given on here was shown as 1 305 324 929 so not sure if this is a typo error or not.
I have emailed Bosch in Germany where they make parts for classic cars and this is the reply with the contact details:
The 1 305 314 930 is out of stock.
The 1 305 314 929 is on stock here in Germany – and is still produced. You should be able to purchase this reflector at your local Bosch Service. See http://www.bosch-service.com for Bosch Services next to you. Sadly we’re not able to sell you this part directly.
Mit freundlichen Grüßen / Best regards
Matthias Klumpp
Robert Bosch GmbH
Automotive Aftermarket, Automotive Tradition (AA/ATR)
www.automotive-tradition.de
www.facebook.com/automotive.tradition
www.partbob.com
Postfach 41 09 60
76225 Karlsruhe
GERMANY
www.bosch.com
Tel. +49 (0)721 942-1660
Fax +49 (0)721 942-2000
Automotive-Tradition@de.bosch.com
Tomorrow I am hoping that Andrew Page motor factors (Bosch dealers) will be able to supply the reflectors but as they have never stocked it, may be a problem. I will let you all know, especially the price, but if anyone has any other info on these parts, this would help a lot.
The alternative Bosch part number, 1 305 314 929, is available and is still produced. From reading other threads the only difference is the location of the sidelight bulb. However, the part number given on here was shown as 1 305 324 929 so not sure if this is a typo error or not.
I have emailed Bosch in Germany where they make parts for classic cars and this is the reply with the contact details:
The 1 305 314 930 is out of stock.
The 1 305 314 929 is on stock here in Germany – and is still produced. You should be able to purchase this reflector at your local Bosch Service. See http://www.bosch-service.com for Bosch Services next to you. Sadly we’re not able to sell you this part directly.
Mit freundlichen Grüßen / Best regards
Matthias Klumpp
Robert Bosch GmbH
Automotive Aftermarket, Automotive Tradition (AA/ATR)
www.automotive-tradition.de
www.facebook.com/automotive.tradition
www.partbob.com
Postfach 41 09 60
76225 Karlsruhe
GERMANY
www.bosch.com
Tel. +49 (0)721 942-1660
Fax +49 (0)721 942-2000
Automotive-Tradition@de.bosch.com
Tomorrow I am hoping that Andrew Page motor factors (Bosch dealers) will be able to supply the reflectors but as they have never stocked it, may be a problem. I will let you all know, especially the price, but if anyone has any other info on these parts, this would help a lot.
Magini appear to have some, got mine from them.
http://www.maginilighting.co.uk/product.php?produc...
http://www.maginilighting.co.uk/product.php?produc...
I purchased one in 2010 from Racetech TVR. The no. on the bosch box was
6 000 770 473.
Dont know if this helps, but the reflector was a perfect match for the damaged item, that i was replacing.
It may well be worth trying to scource this part no. and check if its a match for your original reflector.
6 000 770 473.
Dont know if this helps, but the reflector was a perfect match for the damaged item, that i was replacing.
It may well be worth trying to scource this part no. and check if its a match for your original reflector.
Thanks.
There are 92 available in Germany but when the Bosch supplier in the UK tries to get them they are blocked as they have been for some 2 years.
Waiting for Bosch Germany to get back to me.
During the MoT the tester said the lights appeared a bit dim and looking into the glass we saw what we thought was rust and corrosion on the reflectors.
After taking them out I found it isn't rust, its overspray from when the car was repainted some years ago by a well known dealer.
So, if I can get a solvent that will take the burgundy paint off then I will have cracked it. I hope.
There are 92 available in Germany but when the Bosch supplier in the UK tries to get them they are blocked as they have been for some 2 years.
Waiting for Bosch Germany to get back to me.
During the MoT the tester said the lights appeared a bit dim and looking into the glass we saw what we thought was rust and corrosion on the reflectors.
After taking them out I found it isn't rust, its overspray from when the car was repainted some years ago by a well known dealer.
So, if I can get a solvent that will take the burgundy paint off then I will have cracked it. I hope.
Some have had their reflectors re chromed for about £50 the pair which may be an option
There is a thread on here listing where they sent them
See link below and there is a further link in the second from last post on page 2 for a re-chrome
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
There is a thread on here listing where they sent them
See link below and there is a further link in the second from last post on page 2 for a re-chrome
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
Edited by WOO5IE on Friday 23 August 15:09
N7GTX said:
Thanks, but not at £72.50 each! Plus p&p. Wow that is dear.
If I can get them through Bosch at a sensible price will let you know.
If you can get them direct then I'd get as many as you can, money to be made. Magini aren't bad in comparison... check Racing Greens take on pricing If I can get them through Bosch at a sensible price will let you know.
http://www.thetvrshop.com/TVR/Parts_details/TVR%20...
This is the latest reply from Bosch Germany:
"Seems that Bosch in GB does not have this part in their assortment. Have you tried to purchase it via Scania already?
Scania part numbers are:
· 258758 (for the ..930)
· 258757 (for the ..929)"
So, I will try Scania next and see.
Got a price of £180+p&p+vat from a re-chroming place in Kent so that is a non starter.
"Seems that Bosch in GB does not have this part in their assortment. Have you tried to purchase it via Scania already?
Scania part numbers are:
· 258758 (for the ..930)
· 258757 (for the ..929)"
So, I will try Scania next and see.
Got a price of £180+p&p+vat from a re-chroming place in Kent so that is a non starter.
touching cloth said:
Magini appear to have some, got mine from them.
http://www.maginilighting.co.uk/product.php?produc...
They had 2 left with a little bit of discount. After spending hours trying to locate them cheaper I just gave in and bought them. Should be here in the morning so thank you for that link, a LOT cheaper than some dealers.http://www.maginilighting.co.uk/product.php?produc...
There are 2 for sale on the bay.
http://www.ebay.co.uk/itm/Tvr-chimaera-headlamp-re...
http://www.ebay.co.uk/itm/Tvr-chimaera-headlamp-re...
http://www.ebay.co.uk/itm/Tvr-chimaera-headlamp-re...
http://www.ebay.co.uk/itm/Tvr-chimaera-headlamp-re...
jamienshelly said:
There are 2 for sale on the bay.
http://www.ebay.co.uk/itm/Tvr-chimaera-headlamp-re...
http://www.ebay.co.uk/itm/Tvr-chimaera-headlamp-re...
Thanks but too late! Got mine this morning. Cheers!http://www.ebay.co.uk/itm/Tvr-chimaera-headlamp-re...
http://www.ebay.co.uk/itm/Tvr-chimaera-headlamp-re...
Hello guys, sorry to resurrect an old thread but just a tip for anyone looking to change their reflectors, I've just replaced mine with part no. 1 305 314 929 and if you fit into place using the mounting tags on the new bowls as has been stated the sidelight position changes from bottom to top. No matter I thought, and bolted/stuck everything back into place. As it turns out the bowls are in fact upside down, as on dipped beam I'm illuminating treetops/the surface of the moon and on high beam it brings the beam down but I'm still blinding other drivers. The headlamps are fully adjusted down at present. I can't tell you all how excited I am to do that job again. Bugger!
Hi Jonathan, will try and get a picture demonstrating the correct position using my old headlight bowls when I get a minute. It is only one bung that needs to be moved, on part number ending 929 the 'top' one has to simply be moved to the bottom, its position cannot be mistaken as it is the hole between two horizontal slits along the bowl edge. The sides are correct and can be left alone.
Gassing Station | General TVR Stuff & Gossip | Top of Page | What's New | My Stuff