Ultimate TVR Shootout 4 date?

Ultimate TVR Shootout 4 date?

Author
Discussion

Bluebottle

3,498 posts

240 months

Monday 8th September 2014
quotequote all
phazed said:
Cut out a panel in the floor so I could see where the clonk was coming from, seems like it's the diff itself????

Will still be there, AA card in hand wink
Just got my car back on the road with a full chassis rebuild and diff overhaul by Bernie...eighty miles into running it in, and I have a clonk from the diff!, can't believe its the diff, (need to investigate at the weekend), but several people have said that its common with switching to poly bushes the one or more shift or squeeze out of their mounts?!?

phazed

21,844 posts

204 months

Monday 8th September 2014
quotequote all
I would say it's impossible for a polybush to squeeze out!

My son drove while I put my hands on the mounts and generally checked where the clonking was coming from when he on/offed the throttle.

No play in bushes, just clonks from the 37K mile BTR diff, bugger!

QBee

20,984 posts

144 months

Monday 8th September 2014
quotequote all
phazed said:
No play in bushes........
Mind boggles. hehe
You are still a young man, Peter.....

macdeb

8,511 posts

255 months

Sunday 14th September 2014
quotequote all
Weather looks good, have a great days guys and post up results.
I'm getting back on a roof rolleyes

db484bhpv8

Original Poster:

8,655 posts

220 months

Sunday 14th September 2014
quotequote all
Had 1 run.
hardly any burnout, loads of wheelspin in 1st and 2nd slewing all over the track. Ran 11.76 @ 126.87

Then the car wouldnt restart... wire fell off the starter.... easy fix.
Then had some nasty noises, suspect serp bearing and the other head gasket blowing.
So i changed my rears and headed home.
The car ran fine, temp at 65 all the way, great oil pressure, but the blowing noise got much worse.
I now suspect (and hope) its just an exhaust gasket.

Will find out this Friday.

QBee

20,984 posts

144 months

Sunday 14th September 2014
quotequote all
Slewing all over the track? I'd be changing my trousers as well as my rears.
Bad luck Derek, hope you manage to track down the problems quickly.....and cheaply.

Any times from the rest of the straighliners? How fast was Alex Realmsn in his Volvo?

db484bhpv8

Original Poster:

8,655 posts

220 months

Sunday 14th September 2014
quotequote all
I just didnt have the grip because i hadnt warmed the MTs properly. I intended to do that on later runs.

Heres Peters times with the 5.5
Congratulations on taking (my) number 1 NA spot on the table.


db484bhpv8

Original Poster:

8,655 posts

220 months

Sunday 14th September 2014
quotequote all
Just to add... i heard a rumour the right lane had loads more grip and was at least 3 tenths quicker lol

phazed

21,844 posts

204 months

Sunday 14th September 2014
quotequote all


db484bhpv8 said:
Just to add... i heard a rumour the right lane had loads more grip and was at least 3 tenths quicker lol
That's not funny!

MPoxon

5,329 posts

173 months

Sunday 14th September 2014
quotequote all
12.21 - that is really impressive!

Unfortunately did not get to race any TVRs today only Halfords creations but on the plus side I did get a PB of 13.202 @ 107.30MPH.

Video from Greif cam... http://youtu.be/xzj09rnDpuU


db484bhpv8

Original Poster:

8,655 posts

220 months

Sunday 14th September 2014
quotequote all
phazed said:
That's not funny!
tongue out

cheers Peter. proper LOL before bed. Haha

phazed

21,844 posts

204 months

Sunday 14th September 2014
quotequote all
Ha, we laugh at bed!

I'm just sizing up the increased dia ARBs I picked up on the way back from the Pod, 25mm front and 22mm rear.

I already bought the increased dia Polybush mounts and will fit.......mmm, tomorrow smile