Tuscan door opening on its own
Discussion
Had the same issue last year and it was actually fixed quit easily!
Screw open the little alloy plate which covers the door locking mechanism, there you will see a little contact plate. This contact plate is probably making contact and so triggering the door to go open, I bended the plate a bit further away from the contact point so it couldn't make contact to easily. This fixed the issue and I never experienced it after the fix!
Screw open the little alloy plate which covers the door locking mechanism, there you will see a little contact plate. This contact plate is probably making contact and so triggering the door to go open, I bended the plate a bit further away from the contact point so it couldn't make contact to easily. This fixed the issue and I never experienced it after the fix!
Makes sure the emergency door release cable is not partially engaged so the lock mechanism does not close properly (remember there are two pulls if its the drivers door). Start by pulling the cable to open the door & then push it back home. If the door still opens when it shouldn't then start looking at the lock mechanism
Gassing Station | General TVR Stuff & Gossip | Top of Page | What's New | My Stuff