is there anybody there

[barnsweeper]

Just trying here bear with me.

[barnsweeper]

, ok these are the first images of my car i will try and take some better pics of the exterior next week when i pull it out of the garage to remove the engine, as of yesterday i have managed to remove all engine mounting bolts and all body bolts so it will be a case of wednesday Engine out, and saturday i will remove the body.

[barnsweeper]

Front wishbones

Edited by barnsweeper on Sunday 21st June 08:54

[barnsweeper]

Damage to front o/s wing

Edited by barnsweeper on Sunday 21st June 08:55

[barnsweeper]

[barnsweeper]

[barnsweeper]

[barnsweeper]

[barnsweeper]

This pic shows the extent of smoke damage to the interior.

Edited by barnsweeper on Sunday 21st June 08:56

[barnsweeper]

This pic gives you an idea of how much room there is to work, as paul daniels said (not a lot)

Edited by barnsweeper on Sunday 21st June 08:59

[barnsweeper]

[barnsweeper]

[barnsweeper]

Rear wishbones with rusty diff to the right of the pic.

Edited by barnsweeper on Sunday 21st June 09:00

[barnsweeper]

[url]|http://thumbsnap.com/NWm61JwG[/ukorl]
This PIC shows the o/s outriggers

Edited by barnsweeper on Sunday 21st June 09:16

[barnsweeper]

[barnsweeper]

[barnsweeper]

Its difficult to tell from these pictures but the original colour of the car is silver, after the fire it was jet black, i managed to restore it to around 90% original colour but the clear coat is still stained with soot, giving the car a greeny shade of silver, i will be removing the car from the garage on wednesday to remove the engine, so i will take some better pics of the exterior and you should be able to see what i mean.

[barnsweeper]

J400GED said:

Looking forward to the pics mate.

I just got mine running this afternoon after a body off chassis refurb.

congratulations on getting the car running, i managed to repair my generator yesterday also i have put some pics on here, not brilliant but i hope to improve next week,Jim.

[ChilliWhizz]

Morning Jim, that's some project you have on the go there mate..... What's the plan/timescale ?

[barnsweeper]

[quote=ChilliWhizz]Morning Jim, that's some project you have on the go there mate..... What's the plan/timescale ?[/quote
Morning chili
It is a bit of a project, as for timescale unsure its going to take a fair bit of coin which I haven't much of, first off is engine out on Wednesday then I can remove the body on Saturday if all goes well, then I can get a better idea of how much the chassis is going to cost, I've had a quote of £300 to soda blast and re powder coat it but that's without outriggers or wishbones, so its a case of play it by ear. Jim.