Replacement springs for Nitron R1
Discussion
HI, can someone please tell me the spec they have used for Eibach springs?
I would like to try the variable rate Eibach ones maybe, or a small 50lbs increase per corner over the stock ones, maybe Faulkner as they are a good price. probably 400lbs front, and 300 lbs rear.
Need to know the uncompressed length, O/D etc... as i dont want to order through Nitron.
I would like to try the variable rate Eibach ones maybe, or a small 50lbs increase per corner over the stock ones, maybe Faulkner as they are a good price. probably 400lbs front, and 300 lbs rear.
Need to know the uncompressed length, O/D etc... as i dont want to order through Nitron.
Road springs should be matched to the car (and your driving style) rather than the dampers.
You don't specify which model - - but I'd say if you tried a search on here you'd get some answers.
I don't believe it's necessary to use rising rate springs? You could 'phone Gaz in Essex to get some advice...or one of the service folks should be able to give you a steer.
Nick
You don't specify which model - - but I'd say if you tried a search on here you'd get some answers.
I don't believe it's necessary to use rising rate springs? You could 'phone Gaz in Essex to get some advice...or one of the service folks should be able to give you a steer.
Nick
Gassing Station | General TVR Stuff & Gossip | Top of Page | What's New | My Stuff