Brake and fuel line chassis routing

[alexcurtis]

Hi

Need some help please, as I have been posting on and off for some help through the rebuild but hit a snag I did not take good enough photos (I know realise) of the brake and fuel line routing from back front to back on the chassis, I have a rough idea but would appreciate some definitive photos please. Had a search and there is similar post / request from 2009 but the photos have been deleted

http://www.pistonheads.com/gassing/topic.asp?h=15&...

Its a Griff 500 1999.

All help much appreciated

Thanks in advance Alex

[kris450]

These are the best pics I have when doing this. Wish I'd taken more of course but hopefully they may help a little (happy to be corrected but don't think there would be any difference for the routing between a Chim and Griff). About 3/4 of the way down the page.

https://chimrebuild.wordpress.com/11-operation-reb...

[Mr Jenks]

Hi Alex

Sounds like you are a little in front of me, I expect to be fitting up brake and fuel lines next weekend.
this may help
I have quite a few photos of mine, also '99 500, any particular areas let me know

Dave

[alexcurtis]

Cheers both appreciated video and pics help a lot with my photos as well so should be ok.... Won't be doing brakes till valentines weekend ( gf working) at the earliest just trying to think ahead a couple of jobs! Thanks for the offer of specific pics Dave may need to take you up on that! Alex