TR6 Carburetor issue

TR6 Carburetor issue

Author
Discussion

TVRJAS

Original Poster:

2,391 posts

128 months

Saturday 4th October 2014
quotequote all
Wondering if anyone can help?

My brother has a 1974 TR6 Californian import that he has owned for 20 years and is having a full restoration.

The original carburetors are Peerburgs, I think, and the front one is not firing properly.
Is it likely he would be able to get some second hand replacements and if so where from or what would anybody recommend in terms of a solution.

Many Thanks

Jas



Yertis

18,015 posts

265 months

Sunday 5th October 2014
quotequote all
TVRJAS said:
Wondering if anyone can help?

My brother has a 1974 TR6 Californian import that he has owned for 20 years and is having a full restoration.

The original carburetors are Peerburgs, I think, and the front one is not firing properly.
Is it likely he would be able to get some second hand replacements and if so where from or what would anybody recommend in terms of a solution.

Many Thanks

Jas
They will be Stromberg 175s I think. You won't want secondhand replacements, they can be quite cheaply fixed with service kits. Try Revington TR or someone like that. They're pretty straightforward to look after.

TVRJAS

Original Poster:

2,391 posts

128 months

Sunday 5th October 2014
quotequote all
Yertis said:
TVRJAS said:
Wondering if anyone can help?

My brother has a 1974 TR6 Californian import that he has owned for 20 years and is having a full restoration.

The original carburetors are Peerburgs, I think, and the front one is not firing properly.
Is it likely he would be able to get some second hand replacements and if so where from or what would anybody recommend in terms of a solution.

Many Thanks

Jas
They will be Stromberg 175s I think. You won't want secondhand replacements, they can be quite cheaply fixed with service kits. Try Revington TR or someone like that. They're pretty straightforward to look after.
Thank you Yertis for your reply..

I'm surprised my brother even knows where the engine is so I will take your knowledge over his any day.

I have just called him and he says he has heard of that name Revington via the TR Action magazine and will follow it up with a phone call.

The work has been carried out by our cousin who has a car service center which normally consists of more modern stuff but felt confident to take it on.

The car now looks superb inside and out after a full body off restoration but this carburetor issue had them stumped.

Thanks for your advice Yertis thumbup

Kind regards Jas

Yertis

18,015 posts

265 months

Tuesday 7th October 2014
quotequote all
TVRJAS said:
Thank you Yertis for your reply..

I'm surprised my brother even knows where the engine is so I will take your knowledge over his any day.

I have just called him and he says he has heard of that name Revington via the TR Action magazine and will follow it up with a phone call.

The work has been carried out by our cousin who has a car service center which normally consists of more modern stuff but felt confident to take it on.

The car now looks superb inside and out after a full body off restoration but this carburetor issue had them stumped.

Thanks for your advice Yertis thumbup

No worries. I've used Revington for 26 years, they're very good.

Kind regards Jas

jellison

12,803 posts

276 months

Thursday 16th October 2014
quotequote all
Chuck them in the bin and get some triple webbers..............;)

//j17

4,471 posts

222 months

Thursday 16th October 2014
quotequote all
...then chuck the Webers on eBay and go EFI with a set of modified PI throttle bodies.

TVRJAS

Original Poster:

2,391 posts

128 months

Friday 24th October 2014
quotequote all
So it sounds like the TR owners are the same as TVR owners.. Always a difference of opinion smile

Well my brother has just turned up at my house in his working TR6. It had been sat in a garage for around 20yrs and about 6 months ago decided it was time to get her back on the road.

The carburetor issue held it back a few weeks longer,but he had the original refurbished at a place in Kidderminster for now and will look at replacing if he has any future problems.

He is not looking for performance,just hopefully something reliable,well as reliable as these cars can be

I have advised him that he should get himself a login name for PH as I'm sure it may need your experienced opinions in the future. Also trying to encourage him on a few car meeting that i go along to such a Shelsley Walsh when the start up again next year to listen to enthusiasts advice.

A few pictures to have a look at....


















Regards Jas

madsvlund

345 posts

131 months

Friday 24th October 2014
quotequote all
Hi Jas

Nice example, this TR6 went to my garage last spring for an EFI upgrade, it have 160 bhp on the rubber and the engine run like it was a new toyota :-)






tapkaJohnD

1,930 posts

203 months

Saturday 25th October 2014
quotequote all
Very nice, Jaz!
And Mads!

But Jaz, Mads has chosen to go to a modern EFI fuel injection (and supercharging) solution. Your brother could choose to use the Lucas Pi mechanical fuel injection system that Triumph originally fitted to many TR6s. It got a bad name in the day, because although Triumph had used PI for the very first time in a production car they were ever penny pinchers, and did not train their dealers and garage staff. And so the mechanics screwed it up - not their fault! In fact Lucas Pi is reliable and effective.

As is PistonHeads, but if you want an even wider range of opinion, from people who really know Triumphs (like jellison!) get over to the TR Register message board. Your brother gets TRaction, so he must be a member.

TVRJAS

Original Poster:

2,391 posts

128 months

Saturday 25th October 2014
quotequote all
Hi Mads,John...

Looking very nice Mads... My brother has not spent much money under the bonnet and looks nothing like your beauty.

As you can imagine the price of getting it refurbished escalated and was getting a bit out of hand so his decision in the engine bay was just to get it up and running and gradually start replacing things over a period of time.

We went out for a drive yesterday and it all sounded pretty good,nowhere near the performance I have in my Chimaera but it's not all about performance..Right? laugh What I was surprised at is how narrow they are,not much room between driver and passenger unlike mine where you have the massive center arm rest divide to keep you apart.

He is a member of the TR club and receives the magazine which he passes on to me to have a browse,strange he doesn't seem too interested in my Sprint magazines full of TVR porn biggrin.

I'm pretty sure he will join up on here,doesn't seem right me talking to others about his new baby,well not new he has had about 20 years,but yesterday when I saw it on the drive it looks like new.

Thanks for showing interest... Kind regards Jas (Yes John it's Jas not Jaz) thumbup