|
stevesingo
Original Poster
1,064 posts
91 months
|
Does anyone know of any place the will produce a custom shaped pad?
I have a caliper I can't get a material suitable for road use.
Thanks
Steve
|
|
|
Electric Beaver
533 posts
61 months
|
Try Pro Friction - 01706 365159
Ouit of interest whats the shape you are looking for?
|
|
|
stevesingo
Original Poster
1,064 posts
91 months
|
|
|
Electric Beaver
533 posts
61 months
|
stevesingo said: Not that I know of, best bet is to give them a call! Nothing in the range I have available here to fit unfortunately.
|
|
|
PhillipM
2,604 posts
58 months
|
Carbotech will as I had some weird shaped pads made for the front of the buggy.
|
Advertisement
|
|
|
stevesingo
Original Poster
1,064 posts
91 months
|
Thanks.
Do they have a UK dealer? Google brings up US only.
Steve
|
|
|
stevieturbo
8,380 posts
116 months
|
|
|
stevesingo
Original Poster
1,064 posts
91 months
|
Stevie,
Carbone Lorraine only produce the pad in RC8+ compound. Probably less road friendly than DS3000 I have now.
Cutting a different pad is something I considered, but I now have a solution. I have drawn up some different pad abutment plates that will allow the use of AP racing CP3215 pad shapes. Just need to get the machined up.
Thanks
Steve
|
|
|
stevieturbo
8,380 posts
116 months
|
|
|
stevesingo
Original Poster
1,064 posts
91 months
|
Stevie,
I'm good for machining services. I work for BAE, so have access to just about anything. I'll bookmark him all the same.
Steve
|
|
|
PhillipM
2,604 posts
58 months
|
stevesingo said: Thanks.
Do they have a UK dealer? Google brings up US only.
Steve Speak to Ian @ Carbotech Europe.
|
|
|
Brummmie
4,227 posts
90 months
|
I can make inquiries into whether they have it in another compound, it would not be the first time i have been lucky, But yes we only list RC8R with the vented backing plate.
|
|
|
stevesingo
Original Poster
1,064 posts
91 months
|
RC5+ would be the first choice as this is primarly a road car.
I'd appreciate it if you ask.
Thanks
Steve
|
|
