Installed poly bushes on Jaguar X Type... bouncing like mad!
Discussion
When it comes to polybushes my personal view is they are fine in an applicating where the bush only needs to work in one plain IE on wishboes that only move up and down, they will usually transmit more NVH but that is due to thier harness, you can get softer polys if that is an issue but then by the time you go soft enough to match rubber you may as well fit rubber bushes, in an applictaion where the bush needs to twist or move in multiple plains i prefer rubber to avoid suspension binding IE trailing arms set at differant angles to the other trailing arms say on a solid rear axle or early disco rear lower trailing arms where they need to deform on suspension drop and rise.
TBH i think tightening or freeing off the susspension pivot points with new bushes may well have accentuated other issues like with the shocks or it could well just be as you say, leaving them hanging has finished off the valving inside
TBH i think tightening or freeing off the susspension pivot points with new bushes may well have accentuated other issues like with the shocks or it could well just be as you say, leaving them hanging has finished off the valving inside
27 seconds on ebay found.......
https://www.ebay.co.uk/itm/Jaguar-X-Type-Rear-susp...
https://www.ebay.co.uk/itm/Jaguar-X-Type-Full-susp...
https://www.ebay.co.uk/itm/Jaguar-X-Type-01-09-Pow...
amongst many others.
https://www.ebay.co.uk/itm/Jaguar-X-Type-Rear-susp...
https://www.ebay.co.uk/itm/Jaguar-X-Type-Full-susp...
https://www.ebay.co.uk/itm/Jaguar-X-Type-01-09-Pow...
amongst many others.
Gassing Station | Suspension, Brakes & Tyres | Top of Page | What's New | My Stuff