Does this need repairing?

Does this need repairing?

Author
Discussion

TheArchitect

Original Poster:

1,238 posts

180 months

Thursday 26th January 2012
quotequote all
Hi Guys,

I've got a rather large chip on my roof from a kind stone or something hitting me the other day! Is this likely to spread and lift the lacquer and paint in the surrounding area if I don't sort it out? at the moment all I've done it put a coat of colinite over the top.

Pic

Stone chip by rbaldry86, on Flickr

If it needs repairing to stop it spreading any idea on roughly how much it could cost?

Squiggs

1,520 posts

156 months

Thursday 26th January 2012
quotequote all
Hate to say this but that is peeling lacquer and if you don't get it sorted the chances are it's only going to get worse.

mneame

1,484 posts

212 months

Friday 27th January 2012
quotequote all
Squiggs said:
Hate to say this but that is peeling lacquer and if you don't get it sorted the chances are it's only going to get worse.
+1

TheArchitect

Original Poster:

1,238 posts

180 months

Friday 27th January 2012
quotequote all
Cheers guys, any ideas on how much its likely to cost for a repair whilst I await for an email back from chips away.

snuffle

1,587 posts

183 months

Friday 27th January 2012
quotequote all
The fact that it is peeling like that in the first place would possibly indicate an existing paint problem.
Cheapest option touch up with clear nail varnish or buy a touch up lacquer pot.

If you decide to touch it up then apply the thinnest amount at first to avoid the existing lacquer edge lifting.


paintman

7,692 posts

191 months

Friday 27th January 2012
quotequote all
^^^^^^
To do it properly needs the area flatting back to sound paint.
Then repaint as required.
Bonnet, roof & most bootlids require the whole panel to be done to avoid visible edges to the fresh lacquer.
That's bodyshop, not a man in a van on your driveway.

Squiggs

1,520 posts

156 months

Saturday 28th January 2012
quotequote all
paintman said:
^^^^^^
To do it properly needs the area flatting back to sound paint.
Then repaint as required.
Bonnet, roof & most bootlids require the whole panel to be done to avoid visible edges to the fresh lacquer.
That's bodyshop, not a man in a van on your driveway.
+1