What's the best non acid alloy wheel cleaner
Discussion
Justagreenbadge said:
Have you seen some of the customer feedback regarding this product....not good!HD Adam said:
My wheels always come up very well with the Polish I use.
No idea what they use though
This!!No idea what they use though
The local polish get alloys absolutely mint even after weeks of brake dust caked on.
Apply some chemical then jet wash off.
I have since been told the chemical is actual acid used for cleaning concrete of cement lorries!!!!...watered down a bit.
jagnet said:
hilly10 said:
Bilberry it is then
Bilberry should still be used with caution. It might be acid-free, but it's far from ph neutral. Unless they've changed it recently it has a ph value of 13+ undiluted and strong alkalines are just as capable of damaging certain finishes as strong acids.Rinse the wheels thoroughly afterwards.
Funnily I tried Bilberry after seeing the good write ups but I wasn't that impressed with it, I used Wolfs de ironiser and it is fantastic and you can leave it on there until it dries and it still washes off, but this week I got a new bottle of Q2M from Polished Bliss and tried it yesterday, it is even better, no agitation and it came up spotless, well impressed is an understatement,
Gary
Gary
Autosmart smart wheels acid free is very good stuff especially diluted at 3:1
I find a better way to make wheel cleaner go further and do a better job is to initially rinse the wheels with pressure washer.
I then keep a little of the wheel cleaner in a bucket and soak a sponge in it. Then use the wheel cleaner soaked sponge to remove all the crap.
Works better than just spraying on the cleaner and end up losing less, or ending up with it on paintwork when the wind changes direction.
I find a better way to make wheel cleaner go further and do a better job is to initially rinse the wheels with pressure washer.
I then keep a little of the wheel cleaner in a bucket and soak a sponge in it. Then use the wheel cleaner soaked sponge to remove all the crap.
Works better than just spraying on the cleaner and end up losing less, or ending up with it on paintwork when the wind changes direction.
I've started using AMMO products from the US I'm sure some of you will have seen some of Larry's videos on youtube . I use his wheel shampoo (Brute) which works great either with his fallout remover (Plum) or IronX which is another great product. http://www.youtube.com/watch?v=sd16iX8Ore8
ChrisRS6 said:
This!!
The local polish get alloys absolutely mint even after weeks of brake dust caked on.
Apply some chemical then jet wash off.
I have since been told the chemical is actual acid used for cleaning concrete of cement lorries!!!!...watered down a bit.
That'll be Hydrofluoric acid. You really, really, don't want to mess around with that, even diluted.The local polish get alloys absolutely mint even after weeks of brake dust caked on.
Apply some chemical then jet wash off.
I have since been told the chemical is actual acid used for cleaning concrete of cement lorries!!!!...watered down a bit.
BlackpoolRock said:
I've started using AMMO products from the US I'm sure some of you will have seen some of Larry's videos on youtube . I use his wheel shampoo (Brute) which works great either with his fallout remover (Plum) or IronX which is another great product. http://www.youtube.com/watch?v=sd16iX8Ore8
I like the sound of the AMMO wheel shampoo. Are you ordering it direct from the states? Or does someone distribute it over here?Craikeybaby said:
BlackpoolRock said:
I've started using AMMO products from the US I'm sure some of you will have seen some of Larry's videos on youtube . I use his wheel shampoo (Brute) which works great either with his fallout remover (Plum) or IronX which is another great product. http://www.youtube.com/watch?v=sd16iX8Ore8
I like the sound of the AMMO wheel shampoo. Are you ordering it direct from the states? Or does someone distribute it over here?Patrick Bateman said:
Is the best course of action not to apply a quality sealant to the wheels thus negating the need for a strong cleaner in the first place?
Yes but unless you are the 1st owner and done this from new at some point they will need doing to get them to a condition worthy of sealing them? jaf01uk said:
Patrick Bateman said:
Is the best course of action not to apply a quality sealant to the wheels thus negating the need for a strong cleaner in the first place?
Yes but unless you are the 1st owner and done this from new at some point they will need doing to get them to a condition worthy of sealing them? Gassing Station | Bodywork & Detailing | Top of Page | What's New | My Stuff