How do I polish up dull Carbon Fibre?

[TSS]

Can anybody give any advice on polishing up dull looking interior carbon fibre and what product(s) to use?


Also, I have a small piece of exterior carbon fibre which is past polishing as the lacquer is flaking off - any advice on sorting that out would be great too!

Thanks,

TSS

[dtmpower]

Sand the flaked off laquer and relaquer it and then sand with 2000 , 2500 , 3000 grit wet sandpaper

[captainchaos him]

If its not lacquered you cannot polish it

[SV8Predator]

It's also not carbon fibre, just some pretend st.