DA Polishing on fibreglass
Discussion
I've done multiple TVR's including my own Tuscan. If you're starting out without too much experience under your belt then I'd recommend a hexlogic pad (white is a good start) and I mainly use sonax polishes. This one is my "go-to" light polish which isn't very aggressive:
http://www.cleanyourcar.co.uk/car-polish-compounds...
Equally their Profiline Perfect Finish is also a nice balance between cutting power and fine polish.
The main thing is to prevent the panel getting too hot so I do a max of 2 passes with the DA before wiping and checking the results.
If you're new to detailing and polishing then take a look at some YouTube videos as well. I quite like Ammo channel as it's fairly in depth and helps you understand the bigger picture of what products and techniques to use.
Feel free to pm me if you want to check anything before starting!
http://www.cleanyourcar.co.uk/car-polish-compounds...
Equally their Profiline Perfect Finish is also a nice balance between cutting power and fine polish.
The main thing is to prevent the panel getting too hot so I do a max of 2 passes with the DA before wiping and checking the results.
If you're new to detailing and polishing then take a look at some YouTube videos as well. I quite like Ammo channel as it's fairly in depth and helps you understand the bigger picture of what products and techniques to use.
Feel free to pm me if you want to check anything before starting!
Gassing Station | Bodywork & Detailing | Top of Page | What's New | My Stuff