lets see your engine bay!

[bionicjim]

Dave the only skid marks you will be making is when I take you out for a spin in mine
Full fat with extra cream bring it on dogg
Lol

[paulm5555]

hi guys. I'm off to get mine polished up too but any ideas how to get the Cam cover and spark plug cover actually off its stuck down. or is it a case of a sharp knife and lots of care?

any tips greatly appreciated

[shep1001]

paulm5555 said:

hi guys. I'm off to get mine polished up too but any ideas how to get the Cam cover and spark plug cover actually off its stuck down. or is it a case of a sharp knife and lots of care?

any tips greatly appreciated

Its stuck down as well as bolted. Sharp blade round the seal on the plug cover first. Rubber mallet if needed to free the cam cover when the bolts & plugs are removed.

[dobbie]

Where do you get them polished? They do look good when done. Cheers

[Tonymg]

[Getsis]

[VARLEYHYD]

Something missing in this bay?

[Don1]

VARLEYHYD said:

Something missing in this bay?

Dirt?

[alex_gray255]

Don1 said:

Dirt?

That and something else I think. Just can't see it due to all the cleanliness

[D14 AYS]

Don1 said:

VARLEYHYD said:

Something missing in this bay?

Dirt?

[paulm5555]

thanks for info. I will wait for the rain over here and do it then... looks like more time than a would have expected......

will post a series of pictures. metallic rossa red for mine....

[alex_gray255]

This is a photo of the unfinished cover. It has since been fully painted, finished and black grills installed so looks a lot better.



I'll post the fully finished one when I get a chance over the next few weeks...

[robsco]

alex_gray255 said:

This is a photo of the unfinished cover. It has since been fully painted, finished and black grills installed so looks a lot better.



I'll post the fully finished one when I get a chance over the next few weeks...

Looks very much like the "Sagaris 2" engine cover.

[alex_gray255]

The finished article looks something like this...



...Pic courtesy of Surface and Design who did the work.

[alex_gray255]

robsco said:

Looks very much like the "Sagaris 2" engine cover.

It does indeed. It was modelled on the idea.

[hightrees33]

chim 4.3 speed six

[tuscanturner]

hightrees33 said:

chim 4.3 speed six

Nice manifold

[Session]

What airbox is that? Are the manifolds the Racing Green ones or custom?

[Buzz Billsberry]

That is the mother of all speed six air boxes!


Buzz

[7 TVR]

Session said:

What airbox is that? Are the manifolds the Racing Green ones or custom?

+1 on these Q