RND power output 364bhp
Discussion
Wonder if i was looking at a cached version of the page then, there was only 2 lines of text when I went to look which says
"Power 4.3,decat, fully seq. injection, Canems, big bore exhaust etc. " and no graph .. this is using the link from gacksen's past posts in his profile .. going to the wiki from the forums takes me to the correct wiki! strange
But yeh, rnd cams, springs and followers, the rest tvr power and Lloyds.
"Power 4.3,decat, fully seq. injection, Canems, big bore exhaust etc. " and no graph .. this is using the link from gacksen's past posts in his profile .. going to the wiki from the forums takes me to the correct wiki! strange
But yeh, rnd cams, springs and followers, the rest tvr power and Lloyds.
Edited by spitfire4v8 on Thursday 19th February 12:33
Is the RND issue with their building time scale/project management more than the quality of the product? To say are there many owners who have built their own engines using RND parts with a good long term result? We hear them slated often for what they haven't done but they must have achieved some good results to still be in business. The website fights it's corner well for its parts and modifications.
Maybe some owners would like to come forward with their positive results to level up the see-saw a little.
Maybe some owners would like to come forward with their positive results to level up the see-saw a little.
TVR Power 4.3 base rebuilt, Lloyd Specialist Developments CANEMS ECU conversion, custom wiring loom, fully sequential injection, coil on plugs, knock control, dual wideband lambda, additional oil feed to back of head, camshafts chilled iron RND ENG custom profile done by Kent cams, camshaft timing set to RND ENG specification, RND ENG GT Valve springs, RND ENG Redesigned Billet Finger Followers 360 degree oiling, big bore exhaust system by Lloyd´s, conversion and mapping done by Lloyd Specialist Developments LTD
465.8bhp 365.7 lb/ft
Dastek rolling road.
A RR chart is showing on the wiki albeit I can only see it from my phone not my corporate network.
465.8bhp 365.7 lb/ft
Dastek rolling road.
A RR chart is showing on the wiki albeit I can only see it from my phone not my corporate network.
Don1 said:
Gazzab said:
A RR chart is showing on the wiki albeit I can only see it from my phone not my corporate network.
Andy_mr2sc said:
Is the RND issue with their building time scale/project management more than the quality of the product? To say are there many owners who have built their own engines using RND parts with a good long term result? We hear them slated often for what they haven't done but they must have achieved some good results to still be in business. The website fights it's corner well for its parts and modifications.
Maybe some owners would like to come forward with their positive results to level up the see-saw a little.
http://www.pistonheads.com/gassing/topic.asp?h=0&a...Maybe some owners would like to come forward with their positive results to level up the see-saw a little.
Edited by m4tti on Friday 20th February 07:45
as it is my car i can only speak for my cup of tea and the combination of mods
transformed the car to a new level as i dont have any negative experience with
RND means Dave and the supplied parts.
also when speaking about power figures of builder delivers or not
it is essential to have a before and after quote on the same dyno
and i doubt that a factory 3.6 will deliver 364 horses in regular config....
you guys think rebuilts of well known uk builders have never gone bang ? in a small
country as germay is i know of some...... only difference is i cant read anything
about it one here.....
transformed the car to a new level as i dont have any negative experience with
RND means Dave and the supplied parts.
also when speaking about power figures of builder delivers or not
it is essential to have a before and after quote on the same dyno
and i doubt that a factory 3.6 will deliver 364 horses in regular config....
you guys think rebuilts of well known uk builders have never gone bang ? in a small
country as germay is i know of some...... only difference is i cant read anything
about it one here.....
gacksen said:
as it is my car i can only speak for my cup of tea and the combination of mods
transformed the car to a new level as i dont have any negative experience with
RND means Dave and the supplied parts.
also when speaking about power figures of builder delivers or not
it is essential to have a before and after quote on the same dyno
and i doubt that a factory 3.6 will deliver 364 horses in regular config....
you guys think rebuilts of well known uk builders have never gone bang ? in a small
country as germay is i know of some...... only difference is i cant read anything
about it one here.....
Gasksen im all ears if its one of my engines i need to know please ????? transformed the car to a new level as i dont have any negative experience with
RND means Dave and the supplied parts.
also when speaking about power figures of builder delivers or not
it is essential to have a before and after quote on the same dyno
and i doubt that a factory 3.6 will deliver 364 horses in regular config....
you guys think rebuilts of well known uk builders have never gone bang ? in a small
country as germay is i know of some...... only difference is i cant read anything
about it one here.....
Dom
I don't think it's shipped.
But to make it clear, for you guys who are so interested, this delay has nothing to do with RND and hasn't for the last 6 months or so. RND finished their part of the project and supplied all the parts months ago. It's now exclusively down the the engine builder (SW based) to finish the build and ship it.
Indeed they owe RND money which won't be paid until it ships so they're as keen as anyone to see it delivered.
But to make it clear, for you guys who are so interested, this delay has nothing to do with RND and hasn't for the last 6 months or so. RND finished their part of the project and supplied all the parts months ago. It's now exclusively down the the engine builder (SW based) to finish the build and ship it.
Indeed they owe RND money which won't be paid until it ships so they're as keen as anyone to see it delivered.
Edited by V8 GRF on Monday 1st June 11:07
V8 GRF said:
I don't think it's shipped.
But to make it clear, for you guys who are so interested, this delay has nothing to do with RND and hasn't for the last 6 months or so. RND finished their part of the project and supplied all the parts months ago. It's now exclusively down the the engine builder (SW based) to finish the build and ship it, but he regularly comes up with BS reasons for it not to have shipped.
Indeed they owe RND money which won't be paid until it ships so they're as keen as anyone to see it delivered.
It's 3 years since the project started, so are you saying only the last 6 months delay is not down to RND? But to make it clear, for you guys who are so interested, this delay has nothing to do with RND and hasn't for the last 6 months or so. RND finished their part of the project and supplied all the parts months ago. It's now exclusively down the the engine builder (SW based) to finish the build and ship it, but he regularly comes up with BS reasons for it not to have shipped.
Indeed they owe RND money which won't be paid until it ships so they're as keen as anyone to see it delivered.
RND also owe me money, so not being paid seems to follow these projects around .. I call that Karma. When DD does get paid though I hope he will do the right thing and pay his own outstanding invoices, that would be nice.
- I thought Blacksix said he paid up front for his engine though ?
Edited by spitfire4v8 on Sunday 31st May 16:06
spitfire4v8 said:
It's 3 years since the project started, so are you saying only the last 6 months delay is not down to RND?
No, I mean for the last six months he's had absolutely nothing to do with the project what so ever. The parts were supplied a long time ago, years in fact.- I thought Blacksix said he paid up front for his engine though ?]
I don't know the details but I'm aware there are monies that will only be paid once delivery has been made.
Gazzab said:
Yeah like that's true.
You haven't any idea of what the full facts are so you can't comment.I'm not going to get into any discussion with people on this I only posted as I got fed up with people who post and base their 'opinions' on untruths and biased one sided stories on subjects that in reality they know nothing about.
Gassing Station | Speed Six Engine | Top of Page | What's New | My Stuff