Name that wire...,

[m4tti]

Just finishing off rewiring my engine and there's a wire which I can't remember where it went.

It's one of the first wires on the loom, unlabelled, thick and terminated with a ring connector. Looks almost like a power feed.

Any ideas.

[twinreal]

If engine is not starting now, then i assume it is the main loom ground that originally is attached to the bell housing near the crank sensor.

[m4tti]

Thanks. Yep thats correct. Had some of the chaps confirm my suspicion on my post on the tuscan forum. Ive put it back on one of the starter motor bolts for now as I don't want to pull the bell housing.