Scavenge pump pictures

[binford2000]

Hi there. Can anyone help me out and post some pictures of the Speed 6 scavenge pump and the front end of the sump (pump removed)? I would like to understand what the pump cavity and the ports look like.

Best Regards,
Oliver

[Sagi Badger]

With the RG kit on it to stop stray shims getting dragged through the pump. Think this happened previously hence the TIG repair on the sump housing. Think that finished off someone's journey

J

[Sagi Badger]

Here is the sump off, sorry I don't have an end view, you aren't missing much though, the pump is bolted in on the four bolts you can see on the housing on my previous pics.

J

[m4tti]

binford2000 said:

Hi there. Can anyone help me out and post some pictures of the Speed 6 scavenge pump and the front end of the sump (pump removed)? I would like to understand what the pump cavity and the ports look like.

Best Regards,
Oliver

Hi what are you looking to determine. I have a spare block with the sump removed so can get additional pics to johns above.

[binford2000]

Thanks John, that looks good.

Matt, I assist with the conversion of an automotive engine for an acrobatic aircraft. A multi-stage scavenge pump needs to find its way into that existing engine. The S6 pump seems very compact and I'm trying to learn more about it. The inside gemoetry of the pump cavity is kind of unclear to me, yet. If you had a pic similar to John's 3rd picture, but with the pump removed, so that I can take a look inside?

This is a three-stage pump. Which are the oil pick up points? Front + center + rear of sump?

-Oliver

[crypto]

does this help ?

[binford2000]

It does, thank you!