Air Box Options for 3.6 Tuscan
Discussion
m4tti said:
Thought you might recognise the second pic posted asking if you did the mod your self
It's your pic
That's hilarious. I uploaded the photo that was sent to me when mine was done in November 2015 and hadn't realised it was the same table lol. I think mine was the first he did like that after advice from Matt Smith. Alex had his done a little earlier too through someone else . It's your pic
Here's a closer image of...mine!
So that answers my question lol :/
Edited by ShiDevil on Monday 9th January 18:28
ShiDevil said:
I can only explain my post due to the flu lol. So you do mine too? Should I be asking that question?
I might as well continue to dig a hole lol
Haha no worries. I find it all quite amusing. I might as well continue to dig a hole lol
Just to clear up yes I definitely did yours Steve, I'm sure I did Alex's (not his real name right??) and Mark (milky) who has posted above.
I'm also happy to do others as well!!
Andy_mr2sc said:
While on the subject of air boxes as part of my on going throttle body mods I have tapered out the inlet throat for owners buying an aftermarket airbox. This removes the 4mm step between the body and the edge of the silicon hose to aid airflow:
In addition to the 'porting' have they been shot-blasted/painted to keep them in good condition ?Do you also do the roller-bearing mod to stop the wear and play on the linkages ?
What sort of price are we talking about ?
RedSpike66 said:
In addition to the 'porting' have they been shot-blasted/painted to keep them in good condition ?
Do you also do the roller-bearing mod to stop the wear and play on the linkages ?
What sort of price are we talking about ?
The ones in the pic have been soda blasted and the linkages have been re plated to give their original finish. I have an advert in the PH classifieds explaining the bearing mod but it involves machining a pocket in each side of the body and fitting a sealed bearing and a viton lip seal each side. I also have reusable insulated gaskets to use when fitting the bodies. I'll PM you with prices etc.Do you also do the roller-bearing mod to stop the wear and play on the linkages ?
What sort of price are we talking about ?
Gassing Station | Speed Six Engine | Top of Page | What's New | My Stuff