Steves tam project
Discussion
now i know we are out of "major mods" territory, but as the tam build thread is here.....
Taster shot received from DTT this morning, just loose cover laid over the seat so i can see what its going to look like.
very subtle, i like it a lot.
fantastic news is that Mrs SPG told me to get it retrimmed as she thought the interior didn't work with the exterior....Result!
Taster shot received from DTT this morning, just loose cover laid over the seat so i can see what its going to look like.
very subtle, i like it a lot.
fantastic news is that Mrs SPG told me to get it retrimmed as she thought the interior didn't work with the exterior....Result!
Edited by SteveSPG on Friday 28th March 12:07
Finally got my oil pressure sensor working today. removing the old ECU means there was no appropriately resisted signal input for the pressure sender, so it didn't work, therefore have been using a std oil pressure gauge instead for a few weeks.
sent the dash ECU off to Paul at PS electronics, all done and not expensive
sent the dash ECU off to Paul at PS electronics, all done and not expensive
last thing I've to sort really is the speedo.
the new diff doesn't have a trigger wheel for the speedo sensor, and after failing to get the one in the 6060 to speak to the dash, will make up an insert to put the tvr speed sensor into the 6060 gearbox. i can then get the dash edu recalibrated accordingly.
the new diff doesn't have a trigger wheel for the speedo sensor, and after failing to get the one in the 6060 to speak to the dash, will make up an insert to put the tvr speed sensor into the 6060 gearbox. i can then get the dash edu recalibrated accordingly.
Gassing Station | TVR Major Mods | Top of Page | What's New | My Stuff