The modified model car thread - pics

[MCWS]

Next project ready to go to Canada. the owner will finish the model himself.

Some of the parts I got to make a 5 door GTI.



First is to swap the nose.



The bonnet doesn't fit anymore.



Adding a bit of 'bonnet.



'Bigger rear spoiler.





Looks OK now.



Just be sure everything fits I reinstalled the doors, windows and lights.



Next project ready to go to Canada. the owner will finish the model himself.

Some of the parts I got to make a 5 door GTI.



First is to swap the nose.



The bonnet doesn't fit anymore.



Adding a bit of 'bonnet.



'Bigger rear spoiler.





Looks OK now.



Just be sure everything fits I reinstalled the doors, windows and lights.

[MCWS]

Where does your pet sleep when its cold and snowy outside?





1:18 AutoArt Hennessey Venom GT in Gumball livery. This one will be for sale soon.

[MCWS]

Couple extra pics on the hydro dipped Volkswagen T1 busses.

[MCWS]

Try Uli Nowak or Hobby Design. Guess Ebay is easiest.

[MCWS]

This Porsche 911 T is in Australia



The base model a 911 diecast by Schuco in 1:18



Oilfillercap removed and made a hole in the roof



It will be a right hand drive



Now in Slate Grey



Engine ready to be refitted



Trying if everything still fits



Adding chrome trim





912 versus 911



Custom panel in stead of rear seats



Couple of artifarti pics











911s grow!





And now I have to move the mirror forward.

[MCWS]

Its quite similar to the AutoArt models. Use detal floss to cut out the front wind screen.

The Jensen is a Cult model (Dutch). Grand Prix Models send me this one to customize for one of their customers.

[MCWS]

Small changes like this make the models look so much better! Enjoy

[MCWS]

Great due ready to go to New York. A Porsche 912 and a Porsche 991 Targa GTS.



The base model for the 912 is an AutoArt 911 (1964) diecast.





Sand Beige paint



4 cylinder engine and Fuchs wheels





Some floor mats



Meanwhile dismantling the GT Spirit 991 Targa





Diamond cut wheels



And back in one piece (well actually 2)

[MCWS]

Saab 99 1:43 from grey to red, 3D wheels en extra lights





Mercedes Benz W124 C320 from blue to grey. Different seats and towing hook.















Volvo XC90 from Chinese specs to Quatar.







Jensen Interceptor from grey to black. From MK1 to MK2 , 3D printed wheels and vynil roof.









[

[

[MCWS]

Last one 4 2day. A Porsche 997 GT3 with new colours, lowered stance and custom plate.










Dutch Rally Events













Last one 4 2day. A Porsche 997 GT3 with new colours, lowered stance and custom plate.










Dutch Rally Events

[MCWS]

ferrisbueller said:

Sent you an e-mail - need a little bit of help if possible please.

Found your email!

[MCWS]

Somewhere on this planet a Lucky guy owns this frosted grey Audi R8 V10 Spyder witht HRE P40 Performance Wheels.

Kyosho made the 1:18 diecast.



Besed on photo's we selected a colour.



Not too far off, isn't?



Rebuilding started.



Amost done!









Lower tyres, black air vents on the rear deck, badges and plates are added.

Edited by MCWS on Thursday 15th February 16:42

[MCWS]

Hydro dipping with my own designs!

The Fiat 500 is based on Keith Haring. The VW Beetle / Kaver is a combination of Berlin street art and Berlin street map by Jazzberry Blue.

[MCWS]

A Renault R4 full with vintage adds for the Cote d'Azur.

[MCWS]

What if someone asks for a 50% discount ?

[MCWS]

Blakeatron said:

Hi, need some advice - got some old models out of the loft today and found my UT escort cosworth, but it only has 3wheels!

Would love to find one to match or upgrade to 18” oz 5 spokes.

But I can’t find anything, any tips on where to look?

Try ebay or cs-diecast-tuning.com

[MCWS]

It has been a while since I posted anything. I had a very busy car rally season.

This Renault R5 is for a guy who has sweet memories to family holidays in the 80s/







This project was quite a challenge.It took over a year to source all base models. Then another year to devellop the carbon look for the WRC with hydrodipping.

Edited by MCWS on Tuesday 9th October 07:15

[MCWS]

The 3 Bugatti Veyrons

[MCWS]

I had the case made and the price was killing. Worthwhile but killing.

[MCWS]

Audi RS7 ready to go to Canada!

3D printed Brixton Forged wheels and Innoracks cargobox.