Another Conti GT Question

Another Conti GT Question

Author
Discussion

Lockhouse

Original Poster:

261 posts

199 months

Saturday 21st February 2015
quotequote all
Sorry guys, I've just bought a GT Speed and have no-one else to ask.

The 12v socket in the boot, can that be used to plug a trickle charger into or do I need to get a separate charger\conditioner socket installed?

If I do need a separate socket installed is it just the left hand battery that would be connected so for now could I just fit a CTEK Plug in connector like this until I can stump up the readies for Bentley to do it properly?

Thank you.

2.5pi

1,066 posts

182 months

Saturday 21st February 2015
quotequote all
I believe it can, or at least it could on the Supersport I had, I never used it but the supplying bentley dealer gave me a bentley branded trickle charger on delivery.

Cheers

hog 1

400 posts

223 months

Sunday 22nd February 2015
quotequote all
If you look up under the left hand side of the boot lid when it is shut, you will see that there is a small boxed hole where the Ctek plug plug fits inside and is held in place by magnetic contact. So you do not have to have the boot lid open or the wire crushed if you shut the lid.

I thought this charging point was standard on all Speeds but could be wrong.

The charger which Bentley supply/sell is a Ctek MX10 but has this rather special plug hard wired on to it and I don't see it as an add-on extra on the Ctek website.

Corbeliere

686 posts

119 months

Sunday 22nd February 2015
quotequote all
I have a Ctek and simply put the Crocodile clips onto the main, left hand side, battery.
I do have the proper female connector in the boot but don't have the male part. I'm sure I read somewhere that they are available from a non OEM supplier but I can't remember the name of said part.

Lockhouse

Original Poster:

261 posts

199 months

Monday 23rd February 2015
quotequote all
Corbeliere said:
I have a Ctek and simply put the Crocodile clips onto the main, left hand side, battery.
I do have the proper female connector in the boot but don't have the male part. I'm sure I read somewhere that they are available from a non OEM supplier but I can't remember the name of said part.
Thanks. so you don't disconnect the battery? Do you close the boot, lock the car etc? If you do close the boot what do you do about the mains cable?

Cheers

sjp63

1,996 posts

272 months

Monday 23rd February 2015
quotequote all
hog 1 said:
If you look up under the left hand side of the boot lid when it is shut, you will see that there is a small boxed hole where the Ctek plug plug fits inside and is held in place by magnetic contact. So you do not have to have the boot lid open or the wire crushed if you shut the lid.

I thought this charging point was standard on all Speeds but could be wrong.

The charger which Bentley supply/sell is a Ctek MX10 but has this rather special plug hard wired on to it and I don't see it as an add-on extra on the Ctek website.
THIS

Lockhouse

Original Poster:

261 posts

199 months

Monday 23rd February 2015
quotequote all
sjp63 said:
THIS
Not on mine. She's a 2009 model unfortunately.

Corbeliere

686 posts

119 months

Saturday 28th February 2015
quotequote all
Hi Lockhouse.

The boot will close with the cables running out of it, no problem.
I usually put the charger on the garage floor and run the leads with the clips to the battery.

Les.

Lockhouse

Original Poster:

261 posts

199 months

Sunday 1st March 2015
quotequote all
Corbeliere said:
Hi Lockhouse.

The boot will close with the cables running out of it, no problem.
I usually put the charger on the garage floor and run the leads with the clips to the battery.

Les.
Many thanks.