The "what bike bits have you just bought" thread
Discussion
Another wheel wear-er here. I've gone through a rear Campagnolo Zonda in 5000miles and 11 months. The free hub had collapsed but the wear on the rim meant that a repair became uneconomic.
So I've bought a Shimano RS11 to put on my Defy as it will soon be a 'winter' or 'training' bike when I buy a 'summer' or 'race' bike. I also needed a new set of rear pads - can you spot a causation link between these purchases...
Steve
So I've bought a Shimano RS11 to put on my Defy as it will soon be a 'winter' or 'training' bike when I buy a 'summer' or 'race' bike. I also needed a new set of rear pads - can you spot a causation link between these purchases...
Steve
£9 for two slithers of rubber and 2 clips for my Chris King BB seal replacements............ lets hope the old ones were knackered then and hope this keeps the water out the bearings. DT Hub is appearing today , so whats the chances of the rim and spokes coming from CR as well, so I can wheel build while watching the rain stream down the window tomorrow ?
I ended up ordering another 2 of the feedback mounts I posted above. One for the CX to go below the Grade and another for the Pro C to go in the lounge.
Not quite sure where the Crush is gonna go if I do get one
Am on my way into Soho to go and chat about one at Soho Bikes as we speak.
Not quite sure where the Crush is gonna go if I do get one
Am on my way into Soho to go and chat about one at Soho Bikes as we speak.
5potTurbo said:
They change colour! THAT'S ACE!!
I wish, then I'd feel less of a nutter for the money I paid!Johnny said:
I ended up ordering another 2 of the feedback mounts I posted above. One for the CX to go below the Grade and another for the Pro C to go in the lounge.
Not quite sure where the Crush is gonna go if I do get one
Am on my way into Soho to go and chat about one at Soho Bikes as we speak.
New P7 looks to be only £50 more per build and it's lovely.Not quite sure where the Crush is gonna go if I do get one
Am on my way into Soho to go and chat about one at Soho Bikes as we speak.
Well the credit card has just taken a beating. Not so much as bike bits more of a new bit, as in a Scott Addict R4 for GBP 1,082 delivered to Dubai. Oh also ordered a new pair of shoes (Northface Sonic SRS), 2 bottle cages and Garmin cadence emitter / transmitter.
5-10 days delivery, I just hope I get back to Dubai before it arrives.
5-10 days delivery, I just hope I get back to Dubai before it arrives.
GuinnessMK said:
New wheels for the Cube. Wore out the original rear wheel bearings, cones and hubs knackered.
One of the few benefits of riding an outdated 26" bike is replacement parts seem cheap. £90 for a new pair of wheels with Deore hubs, delivered next day!!
Forgot to order rim tape though!
£3 on rim tape from Edinburgh bike shop this morning, £10 to my local bike mechanic to swap the cassette over and an afternoon of swapping tyres, tubes and discs over, and the Cube is back on the road. One of the few benefits of riding an outdated 26" bike is replacement parts seem cheap. £90 for a new pair of wheels with Deore hubs, delivered next day!!
Forgot to order rim tape though!
No ride yesterday due to the weather, so headed to the Rapha outlet, was pretty empty of stock tbh, did get some chartruese winter gloves for £40 though.
Gone a bit mad over the weekend, a pair of latex tubes, a pair of Bont Vaypours, the gloves and I bagged a pair of lightly used SS Speedplays and cleats on eBay for £68 last night - 2 pairs between 4 bikes just doesn't work!
Gone a bit mad over the weekend, a pair of latex tubes, a pair of Bont Vaypours, the gloves and I bagged a pair of lightly used SS Speedplays and cleats on eBay for £68 last night - 2 pairs between 4 bikes just doesn't work!
Only boring maintenance stuff this week ... Jagwire brake and shifter cable kit, hope headset bearings, 6800 freehub, chain and cassette. I say boring, the winter bike now shifts and brakes just like its supposed to now after that refresh. Chain snapped last week 45 miles into a 94 mile ride ... was getting to the point of needing replacing so thought I'd do the cassette as well ... freehub was making a noise and not engaging properly causing a loud noise when it did. Doesn't look serviceable so had to replace the lot
I've just bought a couple of water bottle cages and a second Garmin Edge speedo/cadence kit for my new MTB bike, a 2016 Scott Scale 910. My first 29er. Oh, and new pedals; Shimano XTR Trail.
I ordered a 2015 model on sale but they didn't have my size so did a deal on the new model instead.
It replaces my 16 year old Giant ATX 880 - which is actually nearly scratch-free and in excellent condition so will be keeping that too; haven't bought anything for that bike in years.
I ordered a 2015 model on sale but they didn't have my size so did a deal on the new model instead.
It replaces my 16 year old Giant ATX 880 - which is actually nearly scratch-free and in excellent condition so will be keeping that too; haven't bought anything for that bike in years.
Edited by Coolbanana on Monday 8th February 19:07
Gassing Station | Pedal Powered | Top of Page | What's New | My Stuff