F10 M5 Sump picture wanted

F10 M5 Sump picture wanted

Author
Discussion

vmackie

Original Poster:

33 posts

181 months

Monday 1st February 2016
quotequote all
I am considering fitting an engine oil pre heater, possibly a Wolverine stick on pad type.

http://www.ebay.co.uk/itm/Wolverine-Engine-Oil-Sum...

Does anyone have a picture of the bottom of the sump on an F10 M5 so I can see if this would be viable?
Otherwise I imagine it is up on a ramp and remove a cover/bracing plate?
I'm guessing here as I have not looked under there at all as yet. (it's cold and wet out there!)



M5 London

259 posts

101 months

Monday 1st February 2016
quotequote all


Courtesy of member Racer Louis of another forum

S800VXR

5,876 posts

200 months

Tuesday 2nd February 2016
quotequote all
With a capacity of 9.5ltrs your gonna have to sit there for sometime to heat the oil up! Also even in Aberdeen it's not cold enough to even think about worrying IMHO.

vmackie

Original Poster:

33 posts

181 months

Tuesday 2nd February 2016
quotequote all
Hello guys

Brilliant pic, thank you for that. Typical,the easily accessed bit has fins on it which make sticking a pad on impossible.

Yes, there is a lot of oil in there. The thought behind this is that my most regular journey is a 25 mile round trip on country roads. At the moment I am almost at my destination before the oil comes up to temperature and I am able to give it some "welly". It is frustrating tootling along for half my journey!

Ah well, patience is a virtue, good thing come to those that wait, etc. etc.