Z4M Battery Access

[Dakkon]

Hi,

Not the most exciting post, but is there any trick to removing the three plastic screws that hold the battery carpet cover in the boot?

[JCW]

No idea but why do you want access? If its for re-charging/jump starting then the positive/negative terminals are in the engine bay.

[shunt]

Turn them 90 degrees and wiggle them out.

[Dakkon]

shunt said:

Turn them 90 degrees and wiggle them out.

Thanks, will give it a go

[Chris_S]

They are the same type of "screws" as on foot mats. A coin will do the trick to release. The tool kit and tow eye is also underneath.

Chris

[R1_NUR]

shunt said:

Turn them 90 degrees and wiggle them out.

Yes agreed and it sometimes help to push the casing in a bit too.

Chris_S said:

They are the same type of "screws" as on foot mats. A coin will do the trick to release. The tool kit and tow eye is also underneath.

Chris

Your clips are different to mine then.

Edited by R1_NUR on Wednesday 19th November 14:09

Edited by R1_NUR on Wednesday 19th November 14:09

[henrycrun]

www.zroadster.net is your friend

[scotia_steve74]

Twist and pull