Discussion
I had just landed at EMA when it did its fly by so got a great view from the ramp. Didn't realise it was coming in so just good timing, nice low fly past and gentle wing wave before heading home, fantastic noise and first time I have personally seen it flying. (used to park next to it a few times in Brize)
Well he was going on about - "He'd also have a go at you for calling it a "pattern". Next time you see Martin Withers, ask him what it's like to fly a Vulcan down the Grand Canyon at below rim height."
Which was of no relation whatsoever to the quote. So sometimes I find myself having to explain things at a much lower level for the elderly.
Which was of no relation whatsoever to the quote. So sometimes I find myself having to explain things at a much lower level for the elderly.
skinley said:
Chaz9950 said:
Just stumbled on the thread! My granddad worked on this very plane, XH558, at Bruntingthrope, for about 10 years. I can't be totally sure how long it was.
97 ft 1 in (29.59 m)HTH.
Actually, would have been a bit shorter than this at the time - they had the nosecone off, and were removing the old, heavy electronics or radar equipment, or whatever it was. I can't remember, I was only young!
So there!
Chaz9950 said:
Actually, would have been a bit shorter than this at the time - they had the nosecone off, and were removing the old, heavy electronics or radar equipment, or whatever it was. I can't remember, I was only young!
So there!
Edited for pic.
Edited by spitfire-ian on Tuesday 22 May 15:21
spitfire-ian said:
Not neccesarily. The radome detaches from the bottom of the nose so the aircraft would still be the same length
Edited for pic.
I remember a Vulcan navigator once telling me that the 3 guys in the back didn't stand much chance if they had to bale out when the gear was down - this pic seems to illustrate why !Edited for pic.
Edited by spitfire-ian on Tuesday 22 May 15:21
Seight_Returns said:
spitfire-ian said:
Not neccesarily. The radome detaches from the bottom of the nose so the aircraft would still be the same length
Edited for pic.
I remember a Vulcan navigator once telling me that the 3 guys in the back didn't stand much chance if they had to bale out when the gear was down - this pic seems to illustrate why !Edited for pic.
Edited by spitfire-ian on Tuesday 22 May 15:21
According to FB they have had an aborted take off with loud bangs and smoke from the engines.
Two engines are damaged by the sounds of things.
"She's being taken back to the hangar for inspection. Definately problems with two engines but not yet sure what or why. I hope to talk with the engineering director later and will post an update as soon as I can."
EDIT - http://www.youtube.com/watch?v=b17XmT9jTBw
Two engines are damaged by the sounds of things.
"She's being taken back to the hangar for inspection. Definately problems with two engines but not yet sure what or why. I hope to talk with the engineering director later and will post an update as soon as I can."
EDIT - http://www.youtube.com/watch?v=b17XmT9jTBw
Edited by marksx on Monday 28th May 14:08
This from the Youtube comments
"Vulcan bomber XH558, regn G-VLCN, out for test run at 1202hrs today, engine warm up on threshold, misfire then loud bang as enginew were quickly stopped. catastrophic engine failre to number #1 engine. runway was closed for all traffic. One incoming Thomson had to be diverted to Manchester airport. Vulcan moved off the runway under its own power to taxiway. Fragments of engine on runway being removed by sweeper/assisted by Seagull bird scarer vehicles.
Vulcan was towed off taxi way at 1304hrs to hangar. no one injured.
2 airport Fire appliances attended scene, and SYP -SY99 helicopter was in area to give assistance if reqd.
not known how soon the engine can be repaired or replaced ?, dont know if it will be now used in any display for some time/Jubilee ??"
Vulcan Website said:
Engine failure update
XH558 was scheduled to take off at noon on May 28th for a crew currency and display training flight. Just after the start of the take-off roll, she experienced problems with two of her Olympus engines. The crew immediately shut all engines down and everyone is safe. At this stage, we don't have any further information but we will keep supporters informed via Twitter (@XH558), Facebook (Vulcan XH558) and the news section (here) of the charity's website (www.vulcantothesky.org).
Unfortunately, this means that she will not be able to fly for at least two weeks, although we will not know exactly how long rectification will take until the problem has been thoroughly investigated.
We will provide further updates when we know more.
Many thanks for supporting Vulcan XH558
XH558 was scheduled to take off at noon on May 28th for a crew currency and display training flight. Just after the start of the take-off roll, she experienced problems with two of her Olympus engines. The crew immediately shut all engines down and everyone is safe. At this stage, we don't have any further information but we will keep supporters informed via Twitter (@XH558), Facebook (Vulcan XH558) and the news section (here) of the charity's website (www.vulcantothesky.org).
Unfortunately, this means that she will not be able to fly for at least two weeks, although we will not know exactly how long rectification will take until the problem has been thoroughly investigated.
We will provide further updates when we know more.
Many thanks for supporting Vulcan XH558
uk_vette said:
Sad news,
However, here might be a stupid question,or two
1/ Can they make a new engine from scratch, or would that just be way too expensive?
2/ Is there any other engine that they can fit?
please, no laughing, I don't know zit about the Vulcan, just it looks great.
vette
I don't think the tooling exits anymore.However, here might be a stupid question,or two
1/ Can they make a new engine from scratch, or would that just be way too expensive?
2/ Is there any other engine that they can fit?
please, no laughing, I don't know zit about the Vulcan, just it looks great.
vette
Yes, they have 8 which they rotate to ensure that engine wear is even, that way they have spares.
2 engines? that's odd. It wasn't unusual for a Victor to lose an engine and promptly lose its neighbour as bits would shoot out the front and into the throat of the one next to it. This was due to the Conways having an extra bit on the front so I'm told. I don't believe the Olympus had those issues
Gassing Station | Boats, Planes & Trains | Top of Page | What's New | My Stuff