GTW at Blyton Park

GTW at Blyton Park

Author
Discussion

LuckyP

Original Poster:

6,243 posts

225 months

Thursday 3rd May 2012
quotequote all
hedgefinder said:
just out of interest is it running the 1.5 turn titan rack I had made? or was it changed to a factory 2.5 turn rack?


Hmmmm scratchchin Lets see on Sunday. It has Titan on the rack and it's great at correcting OS with a dab of oppo, so perhaps yes. I'll check.

Pete

GFWilliams

4,941 posts

207 months

Thursday 3rd May 2012
quotequote all
LuckyP said:
Hmmmm scratchchin Lets see on Sunday. It has Titan on the rack and it's great at correcting OS with a dab of oppo, so perhaps yes. I'll check.

Pete

LuckyP

Original Poster:

6,243 posts

225 months

Thursday 3rd May 2012
quotequote all
Never raced or rallied.....tongue out

macgtech

997 posts

159 months

Thursday 3rd May 2012
quotequote all
LuckyP said:
Never raced or rallied.....tongue out
Roll bars anyone?!

356Speedster

2,293 posts

231 months

Thursday 3rd May 2012
quotequote all
macgtech said:
Roll bars anyone?!
I was thinking the same, LOL!!

Lucky.... I really like the bodywork mods, do you know if these are going to be commercially available via Steve? I'd be seriously tempted myself.... lick

UltimaCH

3,155 posts

189 months

Thursday 3rd May 2012
quotequote all
Roll bars look like they are really needed when tracking. Would mix very well with the rose joint suspension IMO and the body work is superb

GFWilliams

4,941 posts

207 months

Thursday 3rd May 2012
quotequote all
UltimaCH said:
Roll bars look like they are really needed when tracking. Would mix very well with the rose joint suspension IMO and the body work is superb
While it may look like it needs roll bars from the photo, it actually can aid turn in and handling without them smile Also, that angle of photo is going to always make the car look like it's leaning a lot. If you took exactly the same, but of say a GT3RS it would be leaning a lot lot lot more!

LuckyP

Original Poster:

6,243 posts

225 months

Thursday 3rd May 2012
quotequote all
356Speedster said:
macgtech said:
Roll bars anyone?!
I was thinking the same, LOL!!

Lucky.... I really like the bodywork mods, do you know if these are going to be commercially available via Steve? I'd be seriously tempted myself.... lick
It had anti-roll bars!! We took them off. That's for the next owner to play about with!!

Well Steve sold the bodywork mods to Wayne....does that make them commercially available? yes

rob999

607 posts

181 months

Thursday 3rd May 2012
quotequote all
Awesome, that is all.

Storer

5,024 posts

215 months

Thursday 3rd May 2012
quotequote all
I know Titan used to supply steering racks to Ultima, and possibly still do, so being a Titan rack is not an indication that it is a special.

I suspect any bodywork mods are available to anyone but you would probably have to pay for the mould to be designed/built. If any mod was made without ownership passing to the car owner then the designer/fabricator is free to sell more of them.


Paul

LuckyP

Original Poster:

6,243 posts

225 months

Thursday 3rd May 2012
quotequote all
macgtech said:
Looking good! The car looks great and it certainly looks like you were enjoying yourself in the video.

We are testing at Blyton next week. Richard at Blyton is a great chap and extremely helpful and hospitable.

Jonny
Which day are you there Jonny?

macgtech

997 posts

159 months

Friday 4th May 2012
quotequote all
LuckyP said:
Which day are you there Jonny?
We are there on Tuesday morning, assuming the car gets fully repaired this weekend, which, total disasters aside, it should be. And it needs to be - we have round 3 at Snetterton next Saturday!

We wanted a full day but apparently the Caterham boys are there doing some endurance testing.

Are you based locally?

Jonny

LuckyP

Original Poster:

6,243 posts

225 months

Friday 4th May 2012
quotequote all
macgtech said:
LuckyP said:
Which day are you there Jonny?
We are there on Tuesday morning, assuming the car gets fully repaired this weekend, which, total disasters aside, it should be. And it needs to be - we have round 3 at Snetterton next Saturday!

We wanted a full day but apparently the Caterham boys are there doing some endurance testing.

Are you based locally?

Jonny
Not local, no. Is anywhere local to that place? smile

I have a day off on Tuesday, but it's a long old drive. Good luck with it - Say hello to the apex at Bunga Bunga........if you find it!!

Pete

Edited by LuckyP on Friday 4th May 09:45

hedgefinder

3,418 posts

170 months

Friday 4th May 2012
quotequote all
Storer said:
I know Titan used to supply steering racks to Ultima, and possibly still do, so being a Titan rack is not an indication that it is a special.

I suspect any bodywork mods are available to anyone but you would probably have to pay for the mould to be designed/built. If any mod was made without ownership passing to the car owner then the designer/fabricator is free to sell more of them.


Paul
A lot of the tasty high spec race parts that went into this car were bought by Wayne from myself from an advert I placed here on PH many moons ago whilst I was in the middle of an awkward period with the now wife... still gutted about selling all that stuff to this day.
I was only asking about the rack as the 1.5 turn titan rack that I had made which went with the project - I was warned may make the car too twitchy for road use by some.. just curious how it worked out - the factory at the time were using 2.5 turn titan racks for better road drivability but I wasnt all that bothered as I more or less wanted a full GT car and tend to be very single minded no matter what compromises need to be made.

LuckyP

Original Poster:

6,243 posts

225 months

Friday 4th May 2012
quotequote all
hedgefinder said:
Storer said:
I know Titan used to supply steering racks to Ultima, and possibly still do, so being a Titan rack is not an indication that it is a special.

I suspect any bodywork mods are available to anyone but you would probably have to pay for the mould to be designed/built. If any mod was made without ownership passing to the car owner then the designer/fabricator is free to sell more of them.


Paul
A lot of the tasty high spec race parts that went into this car were bought by Wayne from myself from an advert I placed here on PH many moons ago whilst I was in the middle of an awkward period with the now wife... still gutted about selling all that stuff to this day.
I was only asking about the rack as the 1.5 turn titan rack that I had made which went with the project - I was warned may make the car too twitchy for road use by some.. just curious how it worked out - the factory at the time were using 2.5 turn titan racks for better road drivability but I wasnt all that bothered as I more or less wanted a full GT car and tend to be very single minded no matter what compromises need to be made.
I'll give Andy a call now and check the turns - you got me wanting to know now!!!

Pete

LuckyP

Original Poster:

6,243 posts

225 months

Friday 4th May 2012
quotequote all
Just under 2. So neither 2.5 or 1.5 smile

Steve_D

13,747 posts

258 months

Friday 4th May 2012
quotequote all
LuckyP said:
Hmmmm scratchchin Lets see on Sunday. It has Titan on the rack and it's great at correcting OS with a dab of oppo, so perhaps yes. I'll check.

Pete
I suspect that is a custom rack as the factory rack has 'Ultima' cast into it with no indication as to who manufactures it although I believe Titan are the manufacturer.

Steve


UltimaCH

3,155 posts

189 months

Friday 4th May 2012
quotequote all
Well, that is a pretty direct rack. Guess it would take a few minutes to get the feel in your hands... something like a kart

7 TVR

2,589 posts

168 months

Friday 4th May 2012
quotequote all
Pete, looking forward to seeing the car on Sunday!
The more i read and learn about the car the more i realise just how track focused the car is! yikes
Could you drive this to Spa do a td and then drive home? without shaking your fillings out ;] Rose jointed etc

LuckyP

Original Poster:

6,243 posts

225 months

Friday 4th May 2012
quotequote all
7 TVR said:
Pete, looking forward to seeing the car on Sunday!
The more i read and learn about the car the more i realise just how track focused the car is! yikes
Could you drive this to Spa do a td and then drive home? without shaking your fillings out ;] Rose jointed etc
Really mate, the susp was actually quite nice from the few laps I did in it. Quality shocks and RJ wishbones are just fine.

But I agree - this is a track focused car. smile