|
Storer
Original Poster
1,990 posts
84 months
|
Collective wisdom required please.
How large does the gearbox breather tank need to be for a G50-52 and how high have others mounted their tank?
Paul
|
|
|
V8Dom
2,273 posts
71 months
|
mines at the factory now but i have photos....
do you want them emailing
Dom
|
|
|
Storer
Original Poster
1,990 posts
84 months
|
That would be great if you could Dom.
Many thanks
Paul
|
|
|
Steve_D
8,657 posts
127 months
|
The Factory version is about the size of a coffee mug and sits on the chassis rail running across the top of the 'box. It probably can't go any heigher.
Steve
|
|
|
Storer
Original Poster
1,990 posts
84 months
|
Thanks for the photos Dom and the reply Steve.
Mine is the same as the photos and your description Steve.
I had a problem with oil leaking out of the pot. I tried different fittings and was wondering if it was large enough.
I have discovered the problem this morning. I took it off and did a pressure test on it only to find it had a tiny split along the bottom weld. It was enough to allow a little leak. Now welded up again.
BTW this was not a new tank (one of the few old items that went back on the car!!!!) and looked like it had been ground back and made thin on the weld.
Paul
|
Advertisement
|
|
Gassing Station | Ultima | Ultima
What's New | My Stuff | Top of Page
