Alternative Wet Weather Hood for Can Am

Alternative Wet Weather Hood for Can Am

Author
Discussion

The Italian

136 posts

122 months

Sunday 13th July 2014
quotequote all
Dam good job and commentary , thank you very much

Kruncher

Original Poster:

106 posts

186 months

Monday 14th July 2014
quotequote all
You're more than welcome!

If anyone copies this hood, It would be really interesting if you could post some photos on here too, together with any mods/tweaks and also know what you get charged for making it.


confusionhunter

448 posts

222 months

Friday 25th July 2014
quotequote all
I've just emailed my local sail maker with a link to this thread..... See what happens!

Kruncher

Original Poster:

106 posts

186 months

Monday 11th August 2014
quotequote all
Thought I'd give you all an update - as I used the car for the very first time in rain yesterday .... and it wasn't just any rain - it was for over an hour in yesterday's persistent deluge of heavy rain, whilst on the M3 (the so-called remnants of Hurricane Bertha!). Absolutely brilliant and first class - you don't even need the side screens on!!
I took part in the weekend's Supercar run to Wilton House, starting from Brooklands, early yesterday morning. The heavens opened on the M3 just as left Fleet Services. Our next stop was over an hour's drive, some 60 miles away at Gurston Down Hillclimb track in Dorset. The weather was hideous all the way, not stop rain and spray. I decided to drive down the M3 without the side screens on and NO water came in at all through the open section, even when passing large lorries chucking out volumes of spray!
I found the only time I used the separate side screens was when parked up in a crosswind with driving rain coming directly at me from the side. Even then, this was when I was at the exposed top of the down at Gurston, having just done my first run in the wet. I'm really, really pleased with the performance of this custom roof - quite extraordinarily brilliant!
At speed on the motorway, it didn't 'lift' or threaten to un-popper itself, even if you 'accidentally' exceed the limit a little ...
One word of warning though - Since the front screen is interchangeable for the aero one, there is no sealant between the frame and the body - something I had completely clean forgotten - which should have been obvious really! I had an unpleasant constant drip of water over my ankles and feet, coming from behind the dash - however, this will be easily rectified now with some silicone sealant around the base of the front screen frame.
To say 'I'm pleased' is an understatement. This soft top roof had far exceeded what I ever thought it would do and is well worth every penny. I can't recommend it enough to anyone with a Can Am, who has no intention of swapping their screens - get yourself a quote and then get a copy made!

UltimaCH

3,155 posts

189 months

Monday 11th August 2014
quotequote all
Interesting write-up Kruncher. I'll certainly go the way you suggest when my build reaches the finishing stages. I have a feeling that a hood will certainly be needed if the weather patterns becomes like the rain and humidity we are having this summer... furious

V8Dom

3,546 posts

202 months

Monday 11th August 2014
quotequote all
Good to meet you yesterday at Wilton House and the car looks fab and the roof you have had made is really nice and top quality,

Dom

Kruncher

Original Poster:

106 posts

186 months

Monday 11th August 2014
quotequote all
V8Dom said:
Good to meet you yesterday at Wilton House and the car looks fab and the roof you have had made is really nice and top quality,

Dom
Cheers Dom - It was good to meet you and see your GTR too. Great day out, despite the dreadful weather from Fleet to Gurston!

confusionhunter

448 posts

222 months

Tuesday 12th August 2014
quotequote all
Awesome! I visited a local sailmaker last week based on this thread and im going to get one made up. Probably using acylic rather than vinyl. Im also looking at a different clamping mechanism at the front rather than the poppers! Watch this space! smile

Kruncher

Original Poster:

106 posts

186 months

Wednesday 13th August 2014
quotequote all
It will be interesting to see what other fixing method your sailmaker can come up with for fitting to the front screen. The poppers are so quick and easy - and you can partially open it for ease of entry/exit. Admittedly, I'd prefer not to see the poppers, but it works so well. I have been thinking you could always get them anodised black before fitting. Vinyl was chosen as it is so lightweight and takes up little space for storing. I've made a black polythene bag/tube to roll it in, which then stows behind the seats, making it more or less invisible if taking it out with you.

Kruncher

Original Poster:

106 posts

186 months

Monday 25th August 2014
quotequote all
2nd Update:
Went to Beaulieu Supercar today - as you know, in the most atrocious of conditions! 8 hours of non-stop heavy rain, so the Can Am was really put to the test!
Okay, so we did get a little water in, despite carefully sealing the front screen, but no where near as bad as before. It still managed to find its way in somehow, with water occasionally dripping onto ankles - god knows where from though, but can only assume it may be from the wiper arm fitting!
The soft top roof performed really well again, but this time we did get a small drip from the edge of the screen frame behind the front edge of the perspex side windows on the doors. The rain was really heavy all day and it was the worst that nature could throw at us. I reckon a small bead of black silicone running down the very edge of the lower part of the frame to form a small channel/barrier, should do the trick and cure this though. Having said that, we drove there and back without the side screens on, only fitting them once parked up.
Another problem we found was that water got in both doors, so when you lifted them up, the bottom had about 1" depth of rain water! Again, this was nothing to do with the soft top, it can only be coming in through the door locks and wing mirror mounts. A simple drain hole in the bottom of the door would be the solution.
It seems waterproofing a Can Am is a work in progress, but it has to be said we were out all day, in a huge amount of rain, but we're getting there ...

Storer

5,024 posts

215 months

Monday 25th August 2014
quotequote all
Drip onto feet.

Do you have aircon fitted and did you use it to clear the screen of misting?

If you did it was probably moisture from the evaporator not draining properly rather than water getting in from outside.


Paul

Kruncher

Original Poster:

106 posts

186 months

Monday 25th August 2014
quotequote all
Understandable logic, but no, we don't have air con. Everytime we turned right or left, or braked, water dripped on our ankles. Need to get wifey with hose trained on screen whilst I'm upside down under dash to see where it's coming in! The rain was particularly heavy today and relentless, so it hopefully it should only happen again or repeat itself in unusual circumstances.

Spid

381 posts

242 months

Wednesday 27th August 2014
quotequote all
I watched wheeler dealers the other day and they hired a smoke machine to find a water leak in a Aston.
Stuck it inside filled the car with smoke, and looked for where it was escaping

UltimaCH

3,155 posts

189 months

Wednesday 27th August 2014
quotequote all
I guess that if a smoke machine was used, you would see leaks everywhere IMO

V8Dom

3,546 posts

202 months

Thursday 28th August 2014
quotequote all
Spid said:
I watched wheeler dealers the other day and they hired a smoke machine to find a water leak in a Aston.
Stuck it inside filled the car with smoke, and looked for where it was escaping
smoke machine..hahahahha ok... first gear. dump the clutch at 3k and stand on the brakes... i d like to see a smokey burnout youtube video on here with the comment looking for water leak...hahhahahahahahahhaha

we use windscreen company.. they have ultra sonic testers...

you might find said water is sitting ontop of heater and only running off on corners or check wiper arm seals where it does through body work?

ive been using mine alot recently...is it only the south getting all the rain?

Dom

Kruncher

Original Poster:

106 posts

186 months

Thursday 28th August 2014
quotequote all
V8Dom said:
smoke machine..hahahahha ok... first gear. dump the clutch at 3k and stand on the brakes... i d like to see a smokey burnout youtube video on here with the comment looking for water leak...hahhahahahahahahhaha

we use windscreen company.. they have ultra sonic testers...

you might find said water is sitting ontop of heater and only running off on corners or check wiper arm seals where it does through body work?

ive been using mine alot recently...is it only the south getting all the rain?

Dom
My same thoughts, Dom - it's possibly the wiper arm seals as tbis was only fitted for the first time a couple of weeks ago, just before Wilton.I'll get the hose out this weekend and hopefully discover where its coming from.