audi rs4 biturbo in my ultima
Discussion
hey guys i finally have completed installing a 2.7 rs4 biturbo engine in my ultima. i would say it has be a learning process and electrical hell but worth it. getting to fit the engine and intercoolers was tight but i am creative :-)
also alot of change in the engine aby had to be made and re-designed since the rs4 engine is 1 cm wider than the tube construction, so the engine had to be squeezed.
however an audi engine is not a beautiful shiny engine so a alu cover was made both to guide the heat out to the rear and shield heat from the air intake.
the intercooler are placed at the bottom of engine bay and airflow wings will feed them with cool air.
now i just have to complete the car and get this lightweight ultima on track.
also alot of change in the engine aby had to be made and re-designed since the rs4 engine is 1 cm wider than the tube construction, so the engine had to be squeezed.
however an audi engine is not a beautiful shiny engine so a alu cover was made both to guide the heat out to the rear and shield heat from the air intake.
the intercooler are placed at the bottom of engine bay and airflow wings will feed them with cool air.
now i just have to complete the car and get this lightweight ultima on track.
Edited by bamsetand on Saturday 28th February 20:13
yes challenge are a most. solving the unknown seem so attractive that i had to do it.
yes it is a v6 this biturbo engine has so much aftermarket that it is easily possible to tune for 800+ hp. at this point it has 430 whp a friend of mine told me too wait tuning the engine. tuning just become an addiction.
in the begining i was going for the s6 v8 biturbo but it is too wide and tuning part are not easy to get. so i looked at rs4 which has so much aftermarket part and sparepart at fair prices.
yes it is a v6 this biturbo engine has so much aftermarket that it is easily possible to tune for 800+ hp. at this point it has 430 whp a friend of mine told me too wait tuning the engine. tuning just become an addiction.
in the begining i was going for the s6 v8 biturbo but it is too wide and tuning part are not easy to get. so i looked at rs4 which has so much aftermarket part and sparepart at fair prices.
well you are lucky
infact there is a engine for sale now from a centurion tank. the price is 25000 dk kr about 2500 pund
http://www.guloggratis.dk/biler/reservedele/motor/...
infact there is a engine for sale now from a centurion tank. the price is 25000 dk kr about 2500 pund
http://www.guloggratis.dk/biler/reservedele/motor/...
bamsetand said:
hi poul i am glad on your behalf. let me know if he does not reply. the engine is about 150 km away from me.
can i ask of what purpose you need such a huge engine for? spitfire perhaps?
best reg.
No reply yet Alex. I may try calling in a while.can i ask of what purpose you need such a huge engine for? spitfire perhaps?
best reg.
I have a few of these engines. I am going to fit one into a 1936 Rolls Royce Phantom III chassis I have to create a 'special'.
I also supply them to others wishing to do the same or fit them to boats or static displays.
It's a bit of a hobby really.
Paul
Storer said:
No reply yet Alex. I may try calling in a while.
I have a few of these engines. I am going to fit one into a 1936 Rolls Royce Phantom III chassis I have to create a 'special'.
I also supply them to others wishing to do the same or fit them to boats or static displays.
It's a bit of a hobby really.
Paul
Poul the engine is rather large and with 650 hk on a phantom sounds like utopia, but at the same time something that has to be tried. i cant wait to see or hear what such a car looks and sounds like. let me know if you need help and i will give him a call, write me your contakt info somehow. and i will pass them on to the him.I have a few of these engines. I am going to fit one into a 1936 Rolls Royce Phantom III chassis I have to create a 'special'.
I also supply them to others wishing to do the same or fit them to boats or static displays.
It's a bit of a hobby really.
Paul
Looking forward to seeing more of the engine bay...
I don't know if you thought about something this for fabricating a heat shield:
http://www.nimbusmotorsport.com/ProdShop2.asp?id=7...
I don't know if you thought about something this for fabricating a heat shield:
http://www.nimbusmotorsport.com/ProdShop2.asp?id=7...
Storer said:
No reply yet Alex. I may try calling in a while.
I have a few of these engines. I am going to fit one into a 1936 Rolls Royce Phantom III chassis I have to create a 'special'.
I also supply them to others wishing to do the same or fit them to boats or static displays.
It's a bit of a hobby really.
Paul
Poul the engine is rather large and with 650 hk on a phantom sounds like utopia, but at the same time something that has to be tried. i cant wait to see or hear what such a car looks and sounds like. let me know if you need help and i will give him a call, write me your contakt info somehow. and i will pass them on to the him.I have a few of these engines. I am going to fit one into a 1936 Rolls Royce Phantom III chassis I have to create a 'special'.
I also supply them to others wishing to do the same or fit them to boats or static displays.
It's a bit of a hobby really.
Paul
bamsetand said:
Hi Poul i got your mail and have forwarded your info to the owner, i asked him to contact you. or try this no 0045 2685 9315
happy to help you poul.
best reg.
Is the Poul thing an inside joke?happy to help you poul.
best reg.
Storer has signed every post with Paul and you've replied to every post with Poul.
Gassing Station | Ultima | Top of Page | What's New | My Stuff