Track Dimensions
Discussion
I'll ping Richard an email. Though if anyone had the info it would be great.
I need the track for the maths channel on my MoTec data logger to calculate oversteer on the traces.
Now why anyone would think a 715bhp Ultima would oversteer may come as a surprise to some... or perhaps not.
I need the track for the maths channel on my MoTec data logger to calculate oversteer on the traces.
Now why anyone would think a 715bhp Ultima would oversteer may come as a surprise to some... or perhaps not.
rose joint suspension different to bush
however Tony
depending how many turns into the wishbone each rose joint is placed will change the overall width of the car.
unless the factory built your car and the geo hasnt been changed , id run a piece of string over the wheel sideways with a plum weight on it onto the floor... mark with a marker pen on the floor.. this will mark max width at the wheel... then for each wheel and then move the car forward and measure with a tape measure
we could also argue is the factory measurement of hub centre or max width due to camber>?
however Tony
depending how many turns into the wishbone each rose joint is placed will change the overall width of the car.
unless the factory built your car and the geo hasnt been changed , id run a piece of string over the wheel sideways with a plum weight on it onto the floor... mark with a marker pen on the floor.. this will mark max width at the wheel... then for each wheel and then move the car forward and measure with a tape measure
we could also argue is the factory measurement of hub centre or max width due to camber>?
Gassing Station | Ultima | Top of Page | What's New | My Stuff