Front Body Hinges
Discussion
I've been looking for the same (with the factory splitter installed, the opening is a pathetic pain in the backside), but have so far not found anything available / affordable.
There are one or two folks who have made their own hinges, or there's the SS highly modified front end route, but I've yet to find a bolt on alternative available. If someone has found one, pls let us know!!
There are one or two folks who have made their own hinges, or there's the SS highly modified front end route, but I've yet to find a bolt on alternative available. If someone has found one, pls let us know!!
Rscocca said:
I know the question has been asked before but, Has anyone come up with a viable front hood hinge to raise the body up and out when opening so as to not damage splitter?
Yup c JulienHe's been contacted by many but never answered regarding the hinges front AND rear.
http://www.pistonheads.com/gassing/topic.asp?t=109...
or this.....
https://www.youtube.com/watch?feature=player_embed...
More pics of Chris's work on the rear hinges:
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
and
more pics of a front hinge solution:
http://www.pistonheads.com/gassing/topic.asp?t=931...
https://www.youtube.com/watch?feature=player_embed...
More pics of Chris's work on the rear hinges:
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
and
more pics of a front hinge solution:
http://www.pistonheads.com/gassing/topic.asp?t=931...
Edited by confusionhunter on Monday 11th July 21:52
I made some for my noble (unsurprisingly hinges the same with similar splitter) from carbon so that I could bolt the splitter directly to the bottom of the chassis so it can't come off (my splitter got ripped off of my ultima at over 170mph).
The 'trick' for me was making sure they were joined and thus opened together, I used 2 carbon tubes with solid carbon bar in the middle so that the mechanism was light yet strong and effective... it hinges on 4 printer roller bearings that the carbon bars goes through.
It lifts the clam as its opened then curves it over the 100mm splitter.
pick of the hinge workings
As you can see the splitter is quite large
The 'trick' for me was making sure they were joined and thus opened together, I used 2 carbon tubes with solid carbon bar in the middle so that the mechanism was light yet strong and effective... it hinges on 4 printer roller bearings that the carbon bars goes through.
It lifts the clam as its opened then curves it over the 100mm splitter.
pick of the hinge workings
As you can see the splitter is quite large
Edited by andygtt on Thursday 14th July 10:05
Steve_D said:
Can I ask a basic question.
What are people doing under the front clip that requires more space/access?
Apart from checking the fluid levels there is nothing else to do up front once the car is built.
Steve
i want a proper splitter bolted to the chassis not a bit of wood bolted to the front clip then a gap before the floor that wrecks the airflow undernether the carWhat are people doing under the front clip that requires more space/access?
Apart from checking the fluid levels there is nothing else to do up front once the car is built.
Steve
the problem with front hinge system is front of clip goes downwards to open the clip.
id like a splitter like the race cars bolted to the chassis which i m surprised the new Evo didnt have,
Edited by V8Dom on Friday 15th July 10:58
V8Dom said:
Steve_D said:
Can I ask a basic question.
What are people doing under the front clip that requires more space/access?
Apart from checking the fluid levels there is nothing else to do up front once the car is built.
Steve
i want a proper splitter bolted to the chassis not a bit of wood bolted to the front clip then a gap before the floor that wrecks the airflow undernether the carWhat are people doing under the front clip that requires more space/access?
Apart from checking the fluid levels there is nothing else to do up front once the car is built.
Steve
the problem with front hinge system is front of clip goes downwards to open the clip.
id like a splitter like the race cars bolted to the chassis which i m surprised the new Evo didnt have,
Edited by V8Dom on Friday 15th July 10:58
2001ultima said:
i want a proper splitter bolted to the chassis not a bit of wood bolted to the front clip then a gap before the floor that wrecks the airflow undernether the car
"i want a proper splitter bolted to the chassis""then a gap before the floor that wrecks the airflow undernether the car"
Question, I'm questioning, are you saying there should be a panel that goes from the front to the center section (before the drop for the floor) and then I suppose from the rear of the floor to the rear of the car another panel?
2001ultima said:
2001ultima said:
i want a proper splitter bolted to the chassis not a bit of wood bolted to the front clip then a gap before the floor that wrecks the airflow undernether the car
"i want a proper splitter bolted to the chassis""then a gap before the floor that wrecks the airflow undernether the car"
Question, I'm questioning, are you saying there should be a panel that goes from the front to the center section (before the drop for the floor) and then I suppose from the rear of the floor to the rear of the car another panel?
any gap in the floor creates turbulance.. this upset in air causes changes in airflow.
the whole idea of a splitter is to create downforce at the front to balance the wing at the back and by upsetting all this air underneath at high speed it damages the air flow.
the splitter should join the floor..
Gassing Station | Ultima | Top of Page | What's New | My Stuff