Can-Am Door Electrics
Discussion
Please could I trouble some of you to take some detailed photos of how the electric cables for the mirrors/locking (I assume they are electric) are routed into the doors on the Can-Am. I am looking for ideas on how to put electric into the doors on my Renault Spider which has a similar type of door but no electric.
You may have room to allow the wires to just fold or use a rubber boot but any further help or suggestions welcomed.
Thanks
You may have room to allow the wires to just fold or use a rubber boot but any further help or suggestions welcomed.
Thanks
Another idea:
I did not run the cables/wires from the body into the doors......I borrowed an idea from the Hot Rod industry and used door jamb contact buttons. You basically run your wires to buttons in the door jambs, then from corresponding contact buttons in the doors to the mirrors......no gimping or folding wires to deal with. Try "Painless Wiring".
David
I did not run the cables/wires from the body into the doors......I borrowed an idea from the Hot Rod industry and used door jamb contact buttons. You basically run your wires to buttons in the door jambs, then from corresponding contact buttons in the doors to the mirrors......no gimping or folding wires to deal with. Try "Painless Wiring".
David
Gassing Station | Ultima | Top of Page | What's New | My Stuff